Fanuc Alarm PS450 IN PMC AXIS MODE
Fanuc Alarm Description
Fanuc 15i
The PMC axis control mode, the CNC issued a move instruction for the PMC axis.
A move instruction can be issued on one axis from only either the PMC or the CNC.
This alarm is generated when a move instruction is issued from both.
This alarm can be suppressed by setting NPA of parameter No. 2405#5 to “1”.
Fanuc 15
In the PMC axis control mode, the CNC issued a move command for the PMC axis. This alarm can be suppressed by setting NPAA of parameter No. 2405 to 1.