Home Fanuc Learn Examples Sinumerik Haas Reference Alarms Programming About

Haas Setting 2 Power Off At M30


Haas Setting 2 Power Off At M30

Haas Setting Description
Powers down the machine at the end of a program (M30) if this setting is set to “On”. The machine will give the operator a 30-second warning once an M30 is reached; pressing any button will interrupt the sequence.

References

  1. Haas Lathe Operator’s Manual by Haas Automation, Inc.
  2. Haas Mill Operator’s Manual by Haas Automation, Inc.
Haas Setting 2 Power Off At M30