Okuma Alarm-A 1836 Interference area intrusion
Code
None->The spindle has entered the interference range.
1->ZB-axis feed command was issued in interference area when XB-axis is not in pulse limit position.
2->ZB-axis feed command was issued in interference area when B-turret does not index permission pot number.
3->ZA-axis feed command was issued in interference area when A-turret does not index permission pot number.
Measures to Take
1)Set “1” at the machine user parameter No. 24-3 9 ‘Interference Zone Ineffective’ to retract the spindle from the interference range.