Sinumerik Alarm 10604 Channel %1 block %2 thread lead increase too high
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
The thread lead increase is causing an axis overload. A spindle override of 100% is assumed during verification.
Reactions:
– Alarm display.
– Interface signals are set.
– Local alarm reaction.
– Correction block is reorganized.
Remedy:
Reduce the spindle speed, thread lead increase or path length in the NC program.
Program Continuation:
Clear alarm with NC START or RESET key and continue the program.
References
- Siemens Diagnostics Guide by Siemens