Sinumerik Alarm 27007 Axis %1 acceptance test mode is active
Parameters:
%1 = Axis number
Definitions:
Via the operator panel, an SI acceptance test has been started with the acceptance test wizard. The acceptance test mode is activated via the NCK and drive for the time of this acceptance test. In the acceptance test mode, SI PowerOn alarms can be acknowledged with the Reset key. Reactions: – Alarm display.
Remedy:
Deselect the acceptance test with the acceptance test wizard or wait until completed (acceptance test time can be parameterized via MD $MA_SAFE_ACCEPTANCE_TEST_TIMEOUT).
Program Continuation:
Alarm display showing cause of alarm disappears. No further operator action
References
- Siemens Diagnostics Guide by Siemens