Sinumerik Alarm 16510 Channel %1 block %2 no facing axis available
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
Diameter programming has been activated with the keyword DIAMON although no facing axis has been programmed in this NC block. If the diameter axis is not a geometry axis, in the initial setting “DIAMON” the alarm appears as soon as the control is switched on.
Reactions:
– Alarm display.
– Interface signals are set.
– Correction block is reorganized.
Remedy:
Please inform the authorized personnel/service department. Activate the modal G function DIAMON only in NC blocks containing a facing axis or deactivate diameter program with DIAMOF. In machine data 20150 GCODE_RESET_VALUES[28] select “DIAMOF” for the initial set- ting.
Program Continuation:
Clear alarm with NC START or RESET key and continue the program.
References
- Siemens Diagnostics Guide by Siemens