Sinumerik Alarm 16763 Channel %1 block %2 axis %3 programmed speed is illegal (zero or negative)
Parameters:
%1 = Channel number
%2 = Block number, label
%3 = Axis name, spindle number
Definitions:
A spindle speed (S value) was programmed with the value zero or with a negative value.
Reactions:
– Alarm display.
– Interface signals are set.
– Correction block is reorganized.
Remedy:
The programmed spindle speed (S value) must be positive. Depending on the application case, the value zero can be accepted (e.g. G25 S0).
Program Continuation:
Clear alarm with NC START or RESET key and continue the program.
References
- Siemens Diagnostics Guide by Siemens