Sinumerik Alarm 16932 Channel %1 conflict when activating user data type %2
Parameters:
%1 = Channel number
%2 = Data type
Definitions:
The “activate user data” function (PI service _N_SETUDT) modifies a data block (tool off- set, settable zero offset or base frame) which is also written by the NC blocks in preparation. In the event of a conflict, the value entered by the MMC is reset. Parameter %2 specifies which data block is affected: 1: Active tool offset 2: Base frame 3: Active zero offset
Reactions:
– Alarm display.
Remedy:
Check the inputs on the MMC and repeat if necessary.
Program Continuation:
Clear alarm with the Delete key or NC START.
References
- Siemens Diagnostics Guide by Siemens