Sinumerik Alarm 17212 Channel %1 tool management: Load manual tool %3, duplo no. %2 onto spindle/ toolholder %4

Sinumerik Alarm 17212 Channel %1 tool management: Load manual tool %3, duplo no. %2 onto spindle/ toolholder %4

Parameters:
%1 = Channel number
%2 = Duplo no.
%3 = Tool identifier
%4 = Toolholder number (spindle number)

Definitions:
Indicates that the specified manual tool must be loaded in the specified toolholder or spindle before the program is continued. A manual tool is a tool whose data are known to the NCK but which is not assigned to a magazine location and is thus not fully accessible to the NCK, and usually also to the machine, for an automatic tool change.

Reactions:
– Alarm display.

Remedy:
Make sure that the specified tool is loaded in the toolholder. The alarm is cleared automatically after PLC acknowledgement of the tool change on command.

Program Continuation:
Alarm display showing cause of alarm disappears. No further operator action