Sinumerik Alarm 20140 Channel %1 motion synchronous action: traversing of command axis %2 see NC alarm %3
Parameters:
%1 = Channel number
%2 = Axis
%3 = NC alarm
Definitions:
An NC alarm was detected for a command axis which is to be traversed from a synchronous action. The NC alarm is indicated by an MMC alarm number in the 3rd parameter.
Reactions:
– NC Start disable in this channel.
– NC Stop on alarm.
– Alarm display.
– Interface signals are set.
Remedy:
See help information for the additional alarms.
Program Continuation:
Clear alarm with the RESET key. Restart part program
References
- Siemens Diagnostics Guide by Siemens