Sinumerik Alarm 20200 Channel %1 invalid spindle number %2 with tool fine compensation
Parameters:
%1 = Channel number target channel
%2 = Spindle number
Definitions:
There is no spindle/axis assignment in the target channel for the spindle specified in the PUTFTOC command.
Reactions:
– Alarm display.
– Interpreter stop
– Interface signals are set.
– NC Start disable in this channel.
– NC Stop on alarm.
Remedy:
Modify program in channel that writes the tool fine compensation.
Program Continuation:
Clear alarm with the RESET key. Restart part program
References
- Siemens Diagnostics Guide by Siemens