Sinumerik Alarm 22275 Channel %1 block %2 zero velocity of thread axis at position %3 reached
Parameters:
%1 = Channel number
%2 = Block number, label
%3 = Position
Definitions:
An axis standstill was reached at the specified position during thread cutting with G35 due to the linear decrease in the thread lead. The standstill position of the thread axis depends on: • Programmed thread lead decrease • Thread length
Reactions:
– Alarm display.
Remedy:
Change at least one of the above factors.
Program Continuation:
Clear alarm with the Delete key or NC START.
References
- Siemens Diagnostics Guide by Siemens