Sinumerik Alarm 61005 Channel %1 block %2 3rd geometry axis not present
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
With an application on the lathe with no Y-axis in the G18 plane. Alarm triggered by following cycle: CYCLE86.
Reactions:
– Alarm display.
– Interface signals are set.
– NC Start disable in this channel.
– Interpreter stop
Remedy:
–
Program Continuation:
Clear alarm with the RESET key. Restart part program
References
- Siemens Diagnostics Guide by Siemens