Sinumerik Alarm 61110 Channel %1 block %2 finishing allowance at the base > depth infeed
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
The finishing allowance at the base has been specified greater than the maximum depth infeed. Alarm triggered by following cycles: POCKET3, POCKET4.
Reactions:
– Alarm display.
– Interface signals are set.
– NC Start disable in this channel.
– Interpreter stop Remedy: Either reduce finishing allowance or increase depth infeed.
Program Continuation:
Clear alarm with the RESET key. Restart part program
References
- Siemens Diagnostics Guide by Siemens