Sinumerik Alarm 61303 Channel %1 block %2 safe area exceeded
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
Measuring result deviates greatly from specified value for the spigot/hole diameter.
Reactions:
– Interpreter stop
– NC Start disable in this channel.
– Interface signals are set.
– Alarm display.
Remedy:
• Check radius or diameter. Check measuring location (e.g. inaccuracy due to filings).
Program Continuation:
Clear alarm with the RESET key. Restart part program
References
- Siemens Diagnostics Guide by Siemens