Haas Parameter 602 CHUCK FACE DISTANCE – Haas Lathe
Supports the brushless bar feeder. When executing G105 Q4, a new bar is loaded, measured and pushed through the spindle and halted just before the chuck face. This parameter specifies the distance (in 1/10000 inch) that should be left between the bar and the chuck face. It should be set as follows:
Mini-Lathe 440000
SL-10 500000
SL-20 540000
SL-30 540000
SL-30BB 650000
SL-40 650000
TL-15 540000