Home Fanuc Learn Examples Sinumerik Haas Reference Alarms Programming About

Okuma Alarm-A 1776 Sensor head not at retract position


Okuma Alarm-A 1776 Sensor head not at retract position
While A-side sensor head or B-side sensor head is not in retract position, the spindle rotation command (M03, M04) or M-tool rotation command (M13,M14) is issued.

Object
SYSTEM

Code
1->The spindle rotation command (M03, M04) is issued.
2->M-tool rotation command (M13,M14) is issued.
3->Axis movement command is issued.
4->Turret index command is issued.
5->Chuck open/close command is issued.
6->Steadyrest open/close command is issued.
7->The tool breakage sensor was not retract position during spindle rotation.

Or, spindle rotation command was designated, while the tool breakage sensor was not retract position.

8->The tool breakage sensor was not retract position during M-spindle rotation.

Or, M-spindle rotation command was designated, while the tool breakage sensor was not retract position.

9->The tool breakage sensor was not retract position during axis movement or C-axis movement.

Or, axis movement or C-axis movement command was designated,while the tool breakage sensor was not retract position.

10->The tool breakage sensor was not retract position during turret indexing.

Or, turret index command was designated, while the tool breakage sensor was not retract position.

11->The tool breakage sensor was not retract position during door is not close.

Or, door open command was designated, while the tool breakage sensor was not retract position.

12->The tool breakage sensor was not retract position during coolant supply.

Or, coolant supply command was designated, while the tool breakage sensor was not retract position.

Probable Faulty Locations
1)Faulty EC input signals for sensor head position
confirmation:I/O check NO.26 INPUT bit E (iSHRTC)–retract end
I/O check NO.26 INPUT bit F (iSHADC)–advance end
2)Programming error
Program Example:

G13
M117
:
M03 M41 S100
:
M118
:

Measures to Take
Correct the program so that the sensor head returns to the standby position before designation of the spindle rotation command.

G13
M117
:
M118
M03 M41 S100
:
Okuma Alarm-A 1776 Sensor head not at retract position