Okuma Alarm-A 1849 Workpiece unloading unit interlock
A work-out unit up command was issued when the spindle was rotating.
Code
1->A work-out unit up command was issued before the spindle completely stopped at the regular position.
2->A spindle rotation command was issued with the work-out unit not at the lower end.
3->A tailstock quill advance command was issued with the work-out unit not at the lowered position.
4->A work-out unit up command was issued with the tailstock quill not at the retracted position.
5->A work-out unit up command was issued with the backup roller not at the retracted position.
6->A work-out unit up command was issued when the spindle was moving.
7->A spindle rotation command was issued with the work-out unit not at the lowered position.
8->The work-out unit left the lowered position when the spindle was moving.
9->A work-out unit advance/retract command was issued with the chuck closed.
10->A chuck close command was issued with the work-out unit not retracted.
11->XB axis or ZB axis moved when it did not meet the following condition. Or it did not meet the following condition when XB axis or ZB axis was moving.
12->B-turret index command was issued when XB axis is not at a plus variable limit.
13->A spindle rotation command was issued when the work-out unit hand was not open. Or work-out unit hand open/close command was issued during main spindle rotation.
14->A work-out unit up command was issued with the chuck not at the opened.
15->Turret index command was issued when Work-out unit hand is not fully closed.
16->Work-out unit up command was issued when work-out unit is not advance position. Or work-out unit was not advance position when when work-out unit is moving up.
17->Work-out unit up command was issued when front door is not open. Or front door is not open when work-out unit is moving up/down.
18->Work-out unit up/down command was issued when XB/ZB axes are moving.
19->Work-out unit up command was issued when B-turret is indexing.
20->Work-out unit up/down command was issued when work hand is not unload position.
21->XB/ZB axes moving command was issued when work-out unit is not down position. Or work-out unit was not down position when XB/ZB axes are moving.
22->B-turret index command was issued when work-out unit is not down position. Or work-out unit was not down position when B-turret is indexing.
23->Door close command was issued when work-out unit is not down position. Or work-out unit was not down position when door is closing.
24->A work-out unit down command was issued with the chuck not at the opened.