Okuma Alarm-A 8529 Tool monitoring unit error detection
Code
1->The tool monitoring unit failed.
Tool monitoring unit alarm signal(I/O check NO.56 INPUT bit 8 iER1)turned ON.
Probable Faulty Locations
1)[Code]1->Tool breakage,Overload
Okuma Alarm-A 8529 Tool monitoring unit error detection
Code
1->The tool monitoring unit failed.
Tool monitoring unit alarm signal(I/O check NO.56 INPUT bit 8 iER1)turned ON.
Probable Faulty Locations
1)[Code]1->Tool breakage,Overload