Okuma OSP-P300S/P300L Alarm-D list.
For cnc machinists who work on cnc machines with Okuma cnc controls.
Classification Of Okuma Alarms
Alarms related with the OSP are classified into five types, which are
Below are listed Okuma D type alarms for Okuma OSP-P300S/P300L CNC systems.
Okuma Alarm D List
- 4035 Replace memory board battery
- 4036 Key-code data receipt error
- 4037 CCP-CPU error
- 4052 PLC backup data file write
- 4054 ACP key-code data receipt error
- 4055 Safety speed clamping
- 4056 Adjusting Type-J encoder
- 4057 Battery life
- 4058 Previous backup error
- 4059 Backup file error
- 4060 AlarmService internal error
- 4061 UPS Service error
- 4062 Remote Diagnosis error
- 4063 DNC2 communication error
- 4064 Awaiting establishment of DeviceNet
- 4065 FL-net transmission error
- 4066 FL-net transmission failure
- 4067 Maintenance necessary
- 4068 Non-responsive software detected
- 4069 Turret index sequence has not ended.
- 4070 Solid model position error
- 4071 CAS environment file cannot be changed
- 4072 Turret position error
- 4076 CAS software calculation error
- 4077 Turning interlock of CAS
- 4078 Error occurred during CAS
- 4080 Collision Avoidance Function OFF
- 4081 In-position/droop check waiting status
- 4083 Windows updated. Reboot
- 4084 Virus has been detected.
- 4085 Fan motor error at panel computer unit
- 4086 UPS not functioning
- 4087 Non-functioning device detected
- 4088 Virus Detect Function active
- 4090 Machine relocation detected
- 4091 Var. lost motion cannot be applied.
- 4092 MCS Parameter learning
- 4100 Collision avoidance position
- 4101 CAS software environment being changed
- 4102 Awaiting CAS software process
- 4103 Drawing speed over
- 4104 CAS processing time over
- 4105 Collision block detected
- 4106 Collision Avoidance system OFF
- 4107 Awaiting CAS check result
- 4108 Inaccurate material shape
- 4109 CAS operating in rapid mode
- 4110 Turret collision check not performed
- 4120 Overload detected
- 4121 General overload detection disabled
- 4122 Maintenance (by user) necessary
- 4130 MCS Inertia identification
- 4131 VDU initialization failure
- 4132 VDU communication error
- 4133 VDU error
- 4134 MCS Alarm-D occurred
- 4135 MCS DD encoder link error
- 4136 MCS DD encoder error
- 4137 MCS DD encoder (slave sensor) detected error
- 4138 MCS DD encoder initialization failure
- 4139 MCS DD encoder (slave sensor) initialization failure
- 4141 MCS Push reset button to stop spindle
- 4144 MCS power supply unit overload
- 4145 MCS Drive unit external cooling fan stop
- 4147 MCS Drive unit internal cooling fan stop
- 4148 MCS Power supply unit external cooling fan stop
- 4149 MCS Power supply unit internal cooling fan stop
- 4150 MCS Undefined alarm number
- 4151 MCS Inverter unit fault
- 4152 Mistake in data from MCS to NC
- 4153 MCS CON APA deviation
- 4154 MCS Power supply unit error
- 4155 MCS Converter link error
- 4156 MCS DC-bus voltage alarm
- 4157 MCS Motor overcurrent
- 4158 MCS Power unit overheat
- 4159 MCS Power unit overload
- 4160 MCS Supply voltage flutter
- 4161 MCS Inverter capacity differs from spec.
- 4162 MCS Winding change failure
- 4163 MCS Encoder link error
- 4164 MCS Encoder detected error
- 4165 MCS Encoder initialization failure
- 4166 MCS Encoder with shaft detected error
- 4167 MCS Encoder with shaft initialization failure
- 4168 MCS ABSO SCALE error
- 4169 MCS ABSO SCALE initialization failure
- 4170 MCS Magnetic encoder alarm
- 4171 MCS Resolver alarm
- 4172 MCS Pulse generator count over
- 4173 MCS Motor overheat
- 4174 MCS Servo link error
- 4175 MCS Servo link disconnection
- 4176 Mistake in data from NC to MCS
- 4177 MCS Servo data error
- 4178 MCS Illegal command
- 4179 MCS CON speed over
- 4180 MCS Speed command over
- 4181 MCS DIFF over
- 4182 MCS APA speed over
- 4183 MCS Full-closed APA error
- 4184 MCS Over speed
- 4185 MCS Speed deviation over
- 4186 MCS Collision detected
- 4187 MCS Urgent-stop time over
- 4188 MCS Belt is broken
- 4190 MCS Independent encoder initialization failure
- 4191 MCS Calculated current position lies outside range
- 4192 MCS Motor overload
- 4194 MCS ABSO SCALE sub-slider detected error
- 4195 MCS Tandem control communication error
- 4196 MCS Full abso scale link error
- 4197 MCS Full abso scale error
- 4198 MCS Full abso scale initialization failure
- 4199 MCS Axis stop signal error
- 4200 Reboot enabled parameter set
- 4201 MACHINING MANAGEMENT data backup stop
- 4202 DNC-B Communication system abort
- 4203 DNC-B Communication error
- 4204 DNC-B Message format error
- 4205 H1 turret interference barrier parameter not set
- 4206 SPM Parameter unsuitable
- 4207 Unable to execute Hi-CUT Pro control
- 4208 G265/G264 commands: Unusable address character
- 4209 Hi-CUT Pro parameter out of range (replacing)
- 4210 SPM contour control not possible
- 4211 SPM parameter out of range (replacing)
- 4214 RS232C communication not ready
- 4215 Communication buffer over
- 4216 Communication procedure No response
- 4217 Communication procedure NAK/WACK
- 4218 Communication procedure Illegal text
- 4219 Communication procedure ENQ
- 4220 Communication procedure EOT
- 4221 Communication procedure TTD
- 4223 Motor not ready to start
- 4224 Canceling stroke end limit
- 4225 Pitch compensation data calculation
- 4226 MSB load error
- 4227 External start not possible
- 4228 SSynchronized rotation speed over
- 4230 Torque limit recovery
- 4232 Backup data read/write
- 4237 Magazine operation panel communication error
- 4238 Please open magazine door
- 4240 Tool life management No spare tool
- 4242 Parameter set value incorrect
- 4245 Waiting program selection during program operation.
- 4247 Main spindle max. speed designation
- 4248 DNC NC receipt start conditions
- 4249 Tool life warning
- 4251 Axis feed rate restriction
- 4252 Detector operation check mode
- 4258 Y-axis cancel mode
- 4261 Workpiece counter over
- 4267 PLC link error
- 4268 PLC communication error
- 4269 ROBOT control
- 4274 User reserve code
- 4281 Workpiece counter over
- 4284 Thermistor error
- 4285 Thermal deviation compensation
- 4288 PSC Learn converge protect error
- 4289 Spindle able to enter transportation barrier
- 4290 TCP/IP communication error
- 4291 Position encoder auto adjustment
- 4292 Please check the program
- 4294 Extended Y-axis plus variable limit
- 4295 TDC parameter not set
- 4297 Main Magazine tool Quantity over
- 4298 DNC Ethernet communication error
- 4300 B-axis independent encoder connecting
- 4301 Tail-stock position error
- 4302 Please supply oil of chuck
- 4303 Movement to sizing position stopped
- 4304 No axis movement after offset change
- 4305 Y-axis not at turning position
- 4306 Turret movement decelerating
- 4307 Alarm-A at other system
- 4308 X-axis over limit
- 4309 Clutch A slip monitor OFF
- 4311 Interrupt program
- 4314 Learning required for cam data
- 4315 Permissible value exceeded
- 4316 Manual feed invalid
- 4345 Unable to execute feed axis retract function
- 4346 ZA-W interference parameter not set
- 4347 TDC invalid
- 4348 X-C-axis coordinate value error
- 4349 Mode switching impossible
- 4682 Magnetic encoder speed detection error
- 4683 MCS Rotary encoder 5 initialization failure
- 4684 MCS Rotary encoder 5 error
- 4685 MCS Rotary encoder 4 initialization failure
- 4686 MCS Rotary encoder 4 error
- 4687 MCS Rotary encoder 3 initialization failure
- 4688 MCS Rotary encoder 3 error
- 4689 MCS Rotary encoder 2 error
- 4690 MCS Rotary encoder 1 initialization failure
- 4691 MCS Rotary encoder 1 error
- 4692 MCS Linear scale 4 initialization failure
- 4693 MCS Linear scale 4 error
- 4694 MCS Linear scale 3 initialization failure
- 4695 MCS Linear scale 3 error
- 4696 MCS Linear scale 2 initialization failure
- 4697 MCS Linear scale 2 error
- 4698 MCS Linear scale 1 initialization failure
- 4699 MCS Linear scale 1 error
- 4700 External cycle start interlock
- 4701 Chip conveyer overload
- 4702 Cycle start interlock
- 4703 Canceling stroke end limit
- 4704 Please open door
- 4705 Door interlock all axis stop
- 4706 Canceling door interlock
- 4707 Enabling Switch faulty
- 4708 ATC system mode
- 4709 Power sequence error
- 4710 Parameter non set
- 4711 Spindle motor not ready to start
- 4712 Reboot enabled parameter set
- 4713 Executing power OFF sequence
- 4714 Workpiece counter full count
- 4715 Preparing for warming up
- 4716 Motor not ready to start
- 4717 Dual cycle start button interlock
- 4718 Invalid parameter setting
- 4719 Please open side cover
- 4720 Dual cycle start button interlock
- 4721 Feed rate limitation
- 4722 System check mode
- 4723 Machine enabling button pressed
- 4724 Please open safety fence
- 4725 Please close front door
- 4726 Opposite side front door open
- 4727 Safety fence open
- 4728 Please close other side front door
- 4729 Please open magazin door
- 4730 Magazine door open
- 4731 Multiple safety guards open
- 4732 Gauging sensor power ON
- 4733 Measurement system error
- 4734 Please close safety guards
- 4735 Full of chips
- 4736 Sensor head
- 4737 Other door open
- 4738 Magazine OP panel COMM error
- 4739 Turret not ready to start
- 4740 2nd Spindle control interlock
- 4741 Magazine operation panel manual interrupt
- 4742 Turret encoder offset disabled area
- 4743 Turret index disabled area
- 4744 Turnover cycle
- 4745 REDUCE switch operation error
- 4746 Tool change mode sw operation error
- 4747 Gauging sensor battery change
- 4748 Additional coolant level low
- 4749 Please close door
- 4750 Safety interlock
- 4751 Tailstock quill interlock
- 4752 Tailstock absolute coder error
- 4753 Workpiece hand control
- 4754 Bar stock empty
- 4755 Roof window open interlock
- 4756 Canceling robot/loader and machine interlock
- 4757 Sp. oil air lub. air extraction mode
- 4758 Index chuck adjust mode
- 4760 Moving to home position
- 4761 Override condition
- 4762 Side cover open
- 4763 Home position return interlock
- 4764 Spindle orientation interlock
- 4765 Setup not complete
- 4766 Setup complete interlock
- 4767 ACC safety door locking switch NG
- 4768 Please open ACC safety door
- 4769 ACC system mode
- 4770 Mode switch NG
- 4771 Magnet chuck unclamp cycle
- 4772 Tool select switch mismatch
- 4773 ATC shutter barrier area
- 4774 Invalid zero offset no.
- 4775 Please open spindle cover
- 4776 Canceling interference detection
- 4777 Mist collector power OFF
- 4778 Side cover open
- 4779 ATC shutter interlock cancel mode
- 4780 Maintenance door open
- 4781 Ladder gate open.
- 4782 Workpiece stocker error
- 4783 Workpiece stocker overload
- 4784 Mist collector error
- 4785 Self check counter full count
- 4786 Coolant controller error
- 4787 Manual tool change enabled
- 4788 Chip conveyer stop
- 4789 Sensor overstroke
- 4790 Chucking miss air route clogged
- 4791 Linear guide cover interference
- 4792 Workpiece washer overload
- 4793 Coolant filter
- 4794 Sequencer alarm
- 4795 Please open ceiling door
- 4796 APC safety interlock
- 4797 Please open APC door
- 4798 APC door lock incomplete
- 4800 Tow-along steady rest connection
- 4801 Oil mist error
- 4802 Turret rotation interlock
- 4803 Cross rail positioning auto set mode
- 4804 Workpiece washing gun error
- 4805 Coolant unit error
- 4806 Lube oil drain tank overflow
- 4807 Axis lube level low
- 4808 Coolant level low
- 4809 ATC step time over
- 4810 System check
- 4811 Coolant tank upper level
- 4812 Chip crusher error
- 4813 Waiting for workpiece check
- 4814 Chuck open/close interlock
- 4815 Attachment turret rotating
- 4816 Long boring bar interlock
- 4817 Safety door open interlock
- 4818 Attachment manual change mode
- 4819 ATC door not at end of stroke
- 4820 M-Spindle rotation limit
- 4821 Steady rest interlock
- 4822 Feed axis condition
- 4823 Turret indexing at reduced speed
- 4824 Setup mode
- 4825 Axis position encoder control error
- 4826 General overload detection disabled
- 4827 Canceling chuck grasp interlockl
- 4828 Please switch door interlock ON
- 4829 NC tailstock thrust change interlock
- 4830 Tool indexing not complete
- 4831 Door interlock
- 4844 Coupling device interlock
- 4845 Coolant level warning
- 4846 Unloader setting position parameter
- 4847 Interference area intrusion
- 4848 No lower table present signal
- 4849 Coolant level
- 4850 Safety fence interlock
- 4851 Door interlock
- 4852 Canceling stroke end limit
- 4853 Robot/loader power sequence error
- 4854 Loader interference
- 4855 Front door open interlock
- 4856 Please open safety fence
- 4857 Please close safety fence
- 4858 Feed rate limit
- 4859 Teaching panel enabling switch error
- 4860 Multiple safety guards open
- 4861 Equip. safety fence parameter mismatch
- 4862 Dual cycle start button interlock
- 4863 Tool change count-up
- 4864 Other door open
- 4865 Performing turnover cycle
- 4866 No workpiece
- 4867 M-spindle angle uncertain
- 4868 Cycle start interlock
- 4869 Chuck was changed
- 4870 Invalid servo data selection
- 4871 Inside barrier
- 4872 Tailstock fretting
- 4873 Door open/close limit switch NG
- 4874 XB cover interference
- 4875 Please push the NC start button
- 4876 Please discharge coolant
- 4877 Invalid positioning point
- 4878 Pulse handle mode
- 4879 Curvic cover not attached
- 4880 Measurement unit error
- 4881 NG chute workpiece present
- 4882 Quality check counter notice count
- 4883 Tow-along tailstock unclamp
- 4884 Tool counter full count
- 4885 Quality check counter full count
- 4886 Tool counter warning
- 4887 Tailstock/Chuck Pedal Enable
- 4888 Mode switch operation error
- 4889 PLC link error
- 4890 Dust collector in local mode
- 4891 Chip conveyor in local mode
- 4892 Chip conveyor error
- 4893 OP panel not at retract position
- 4894 Multi-counter tool life warning
- 4895 Hydraulic fluid level low
- 4896 Lubricant level
- 4897 Gauging data ready time out
- 4898 Power save ON
- 4899 Lower turret origin return interlock
- 4900 Motor not ready to start
- 4903 Reboot enabled parameter set
- 4904 Barrier intrusion
- 4905 Safety speed clamping
- 4907 Alarm-A at other system
