The cycle Data Entry is activated, in MDI and Edit modes, through this keys sequence:
G81 <ENT=..> <RAP=..> <RAL=..>
| Parameter | Description |
|---|---|
| ENT | Depth quote reached at working feed |
| RAP | Quote reached in rapid at the beginning of cycle |
| RAL | Quote reached in rapid at the end of the cycle. |
ContentsECS G82 Drilling with Dwell for chip breakingProgrammingParameters ECS G82 Drilling with Dwell for chip breaking The only difference between this cycle and the standard drilling G81 is the dwell…
ContentsECS G83 Deep Drilling with clearingProgrammingParameters ECS G83 Deep Drilling with clearing This cycle is normally used to drill deep holes. The first drill the bit will reach the quote…
ContentsECS G85 Boring CycleProgrammingParameters ECS G85 Boring Cycle The only difference between this cycle and the Standard Drilling G81 is that the tool return to RAL quote is done at…
ContentsECS G83/r Deep Drilling with Dwell for chip breakingProgrammingParameters ECS G83/r Deep Drilling with Dwell for chip breaking The differences between this cycle and the deep drilling G83 are: At…
ContentsECS G81/3 – 3 Layers DrillingProgrammingParameters ECS G81/3 – 3 Layers Drilling With this cycle it is possible to drill holes defining two zones where the bit will advance at…
ContentsECS G86 Boring with Spindle stop CycleProgrammingParameters ECS G86 Boring with Spindle stop Cycle The only difference between this cycle and the Standard Drilling G81 is that the spindle, reached…
ContentsECS G89 Boring with Dwell CycleProgrammingParameters ECS G89 Boring with Dwell Cycle This cycle differs from the standard Boring cycle G85 allowing to program a dwell time (TIM sec) between…
ContentsECS G84 TappingProgrammingParameters ECS G84 Tapping This cycle is used to tap when the Milling Machine spindle is not equipped with of a position transducer. In this case it is…
ContentsECS G87 Boring with Retraction CycleProgrammingParameters ECS G87 Boring with Retraction Cycle This cycle differs from the “Boring with Spindle Stop” G86 because in this case, when tool reaches the…
G83 peck drilling cycle perform the drilling operation in multiple pecks, this technique makes deep-hole drilling easy and economical. Cutting feed is performed intermittently to the bottom of the hole…
G83 Peck Drilling Cycle G-code is modal so that it is activated every X and/or Y axis move, and it will rapid to that position and then cause this canned…
G82 drilling cycle is also called G82 counter boring cycle. G82 is a normal drilling cycle the only difference is that it dwell for specified time at the bottom of…
ContentsFanuc G73 High Speed Peck Drilling CycleProgrammingParametersCycle OperationG98 G99Cancel G73Example Program Fanuc G73 High Speed Peck Drilling Cycle Fanuc G73 High Speed Peck Drilling cycle performs high–speed peck drilling. It…
Selca G82 Deep mixed drilling cycle ContentsProgrammingParameters Programming G82 [X… Y…] Z… I… J… [Q…] [K…] [F…] [D0=…] [D7=1] [D8=…] [D9=1] [D10=…] [D11=…] [D12=…] [D13=…] [D14=…] Parameters Parameter Description X,Y…
G81 drilling cycle is used for simple drilling/spot drilling operations. ContentsSyntaxUsageWorkingG98 G99 ModesExampleRepeat DrillingWorking ExamplesG98 G99 ExampleRepeat Drilling Example Syntax G81 X… Y… Z… R… K… F… Parameter Description X Hole…
Siemens Sinumerik CYCLE82 Drilling Counterboring cycle. Sinumerik CYCLE82 works on Sinumerik 840D, 810D, 808D and on similar Sinumerik CNC controls. ContentsSinumerik CYCLE82 Example ProgramSinumerik CYCLE82 FormatSinumerik CYCLE82 Working Sinumerik CYCLE82…
Selca G88 Spaced plane drilling fixed cycle ContentsProgrammingParameters Programming G88 [X… Y…] Z… J… [K…] [F…] [D8=…] Parameters Parameter Description X,Y hole coordinates. Z first wall depth. J drilling starting…
G85 boring cycle is used to bore a hole. ContentsSyntaxUsageWorkingG98 G99 ModesRepeat Drilling Syntax G85 X… Y… Z… R… F… K… Parameter Description X Hole position in x-axis. Y Hole…
Selca G81 Drilling /spot facing fixed cycle ContentsProgrammingParameters Programming G81 [X… Y…] Z… [I…] J… [Q…] [K…] [F…] [D8=…] [D9=1] [D10=…] [D11=…] [D13=…] Parameters Parameter Description X,Y hole coordinates. Z…
This cnc program example explains the use of G81 Drilling cycle but this time the tool is not positioned in the usual way (G90 absolute programming mode) but this time…
