Home Fanuc Learn Examples Sinumerik Haas Reference Alarms Programming About

Haas Setting 55 Enable DNC From MDI


Haas Setting 55 Enable DNC From MDI

Haas Setting Description
Turning this setting “ON” will make the DNC feature available. DNC is selected, in the control by pressing the MDI/DNC button twice.
The DNC Direct Numeric Control feature is not available when set to “OFF”.

References

  1. Haas Lathe Operator’s Manual by Haas Automation, Inc.
  2. Haas Mill Operator’s Manual by Haas Automation, Inc.
Haas Setting 55 Enable DNC From MDI