Haas Setting 52 G83 Retract Above R
Haas Setting Description
Range 0.0 to 30.00 inches or 0-761mm). This setting changes the way G83 (peck drilling cycle) behave. Most programmers set the reference (R) plane well above the cut to ensure that the chip clearing motion actually allows the chips to get out of the hole. However this wastes time as the machine will “drill” through this empty distance. If Setting 52 is set to the distance required to clear chips, the R plane can be put much closer to the part being drilled.
Haas Setting 52 G83 Retract Above R
References
- Haas Lathe Operator’s Manual by Haas Automation, Inc.
- Haas Mill Operator’s Manual by Haas Automation, Inc.