Sinumerik Alarm 2190 Hardware plug-in module for communication with the digitizer missing
Definitions:
MD $MN_ASSIGN_DIGITIZE_TO_CHAN was used to activate the digitizing function by assigning it to a channel. The function requires a hardware module (RS-422 board plugged into the NCU) for communication with the digitizing unit. This module was not found when booting.
Reactions:
– Alarm display.
– Interface signals are set.
Remedy:
Please inform the authorized personnel/service department.Plug in communications module or cancel channel assignment.
Program Continuation:
Switch control OFF – ON.
References
- Siemens Diagnostics Guide by Siemens