Sinumerik Alarm 10862 Channel %1 block %2 master spindle also used as path axis
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
A contour has been programmed that also includes the master spindle as contouring axis.However, the velocity of the contour is derived from the rotational speed of the master spindle (e.g. G95).
Reactions:
– Alarm display.
– Interface signals are set.
– Local alarm reaction.
– Correction block is reorganized.
Remedy:
Modify the program so that no reference is possible to the program itself.
Program Continuation:
Clear alarm with NC START or RESET key and continue the program.
References
- Siemens Diagnostics Guide by Siemens