Fanuc Alarms

Fanuc Alarm PS510 DUPLICATE M–CODE (SPOS AXIS POSITIONING) Fanuc Alarm Description Fanuc 15i A function to which the same code as this M code is set exists. (spindle positioning, positioning)

Fanuc Alarm PS536 ADDRESS E OVERFLOW (G95) Fanuc Alarm Description Fanuc 15i The feedrate for the hole drilling axis calculated from the E and S codes is too fast in…

Fanuc Alarm PS472 ILL–COMMAND IN G81.1 MODE Fanuc Alarm Description Fanuc 15i Either G81.1 was instructed again while in the chopping mode, or a move instruction was issued to the…

Fanuc Alarm PS509 DUPLICATE M–CODE (SPOS AXIS ORIENTATION) Fanuc Alarm Description Fanuc 15i A function to which the same code as this M code is set exists. (spindle positioning, orientation)

Fanuc Alarm PS449 ILLEGAL TOOL LIFE DATA Fanuc Alarm PS449 NO TOOL LIFE DATA Fanuc Alarm Description Fanuc 15i Tool life management data is damaged for some reason. Reload the…

Fanuc Alarm PS450 IN PMC AXIS MODE Fanuc Alarm Description Fanuc 15i The PMC axis control mode, the CNC issued a move instruction for the PMC axis. A move instruction…

Fanuc Alarm PS470 G40.1 to G42.1 PARAMETER MISS Fanuc Alarm Description Fanuc 15i The normal line direction control axes parameter settings are erroneous. · Set the normal line direction control…

Fanuc Alarm PS447 ILLEGAL TYPE OF TOOL CHANGE Fanuc Alarm Description Fanuc 10/11/12/15 The tool change method is set incorrectly.

Fanuc Alarm PS448 ILLEGAL FORMAT AT LIFE DATA Fanuc Alarm PS448 UNUSABLE ADDRESS (G10L3) (Fanuc 15) Fanuc Alarm Description Fanuc 15i An illegal address was specified in a program (G10…

Fanuc Alarm PS440 T COMMAND NOT FOUND Fanuc Alarm PS440 T COMMAND NOT FOUND (G10L3) Fanuc Alarm Description Fanuc 15i No T command was specified in a program which sets…

Fanuc Alarm PS441 NOT USING TOOL IN LIFE GROUP Fanuc Alarm Description Fanuc 15i An H99 instruction, D99 instruction or the H/D code specified in parameters (No. 7443, 7444) has…

Fanuc Alarm PS442 ILLEGAL T COMMAND AT M06 Fanuc Alarm Description Fanuc 15i The tool group of the tool specified in the tool instruction (return tool group) after the M06…

Fanuc Alarm PS446 ILLEGAL H, D, T COMMAND Fanuc Alarm Description Fanuc 10/11/12/15/15i A value specified by T (tool No. ), D (cutter compensation No. ) or H (tool length…

Fanuc Alarm PS437 ILLEGAL LIFE GROUP NUMBER Fanuc Alarm Description Fanuc 10/11/12/15/15i A tool group number exceeded the maximum value. The tool group No. (P after G10 L3:) or the…

Fanuc Alarm PS438 GROUP NOT FOUND AT LIFE DATA Fanuc Alarm Description Fanuc 10/11/12/15/15i A tool group specified in the machining program was not set in the tool life management…

Fanuc Alarm PS439 OVER MAXIMUM TOOL NUMBER Fanuc Alarm Description Fanuc 10/11/12/15/15i The number of tool specified in a single tool group exceeds the maximum allowed number.

Fanuc Alarm PS443 P, L COMMAND NOT FOUND Fanuc Alarm Description Fanuc 10/11/12/15/15i No P (group No. ) or L (tool life) was specified at the beginning of a program…

Fanuc Alarm PS444 OVER MAXIMUM LIFE GROUP Fanuc Alarm Description Fanuc 15i The number of blocks in which P (group No. ) or L (tool life) is instructed exceeding the…

Fanuc Alarm PS445 ILLEGAL L COMMAND Fanuc Alarm Description Fanuc 10/11/12/15/15i An illegal range instructed in the L (tool life) instruction was found while loading tool life management data.

Fanuc Alarm PS427 TOO MANY AXES FOR I–R MOVE Fanuc Alarm Description Fanuc 10/11/12/15 There is no single–axis movement command specified in a block in which chamfering or corner rounding…

Fanuc Alarm PS428 MISMATCH AXIS WITH CNR, CHF Fanuc Alarm Description Fanuc 10/11/12/15 I was specified with axis X or K was specified with axis Z in a block in…

Fanuc Alarm PS413 G37 SPECIFIED WITH T–CODE Fanuc Alarm Description Fanuc 10/11/12/15 A T code was specified in the same block as a tool length measurement command.

Fanuc Alarm PS414 G37 OFFSET NO. UNASSIGNED Fanuc Alarm Description Fanuc 10/11/12/15 No T code was specified before the tool length measurement command.

Fanuc Alarm PS426 TOO MANY ADDRESSES Fanuc Alarm Description Fanuc 10/11/12/15 More than one of I, (J), K, or R was specified in the same block as chamfering or cornering….

Fanuc Alarm PS425 NOT DELETE TOOL DATA IN OPERATION Fanuc Alarm PS425 TOOL DATA CANNOT BE DELETED (Fanuc 15) Fanuc Alarm Description Fanuc 15/15i Tool data cannot be deleted.

Fanuc Alarm PS410 G37 IMPROPER AXIS COMMAND Fanuc Alarm PS410 G37 INCORRECT (Fanuc 15) Fanuc Alarm Description Fanuc 10/11/12/15/15i No axis or 2 or more axes were specified in the…

Fanuc Alarm PS411 G37 SPECIFIED WITH H CODE Fanuc Alarm PS411 G37 SPECIFIED WITH D/H CODE Fanuc Alarm Description Fanuc 10/11/12/15/15i A D or H code was specified in the…

Fanuc Alarm PS412 G37 OFFSET NO. UNASSIGNED Fanuc Alarm Description Fanuc 10/11/12/15/15i No D or H code was specified in the automatic tool measurement instruction (G37) block.

Fanuc Alarm PS424 OVER MAXIMUM TOOL DATA Fanuc Alarm Description Fanuc 15i An attempt was made to set tool data exceeding the maximum number of tool data sets.

Fanuc Alarm PS400 PROGRAM NOT MATCH Fanuc Alarm Description Fanuc 10/11/12/15/15i The program in memory does not match the program stored on tape. Multiple programs cannot be matched continuously when…

Fanuc Alarm PS431 MISSING MOVE AFTER CNR, CHF Fanuc Alarm Description Fanuc 15i The move direction or distance in the block following the block in which chamfering or cornering is…

Fanuc Alarm PS419 SPINDLE NOT ZERO RETURNED Fanuc Alarm Description Fanuc 10/11/12/15 Orientation (zero position return) was not completed in spindle positioning.

Fanuc Alarm PS421 SETTING COMMAND ERROR Fanuc Alarm Description Fanuc 10/11/12/15/15i The instruction for setting tool data (G10L70 to G11, G10L71 to G11) is in error.

Fanuc Alarm PS422 NOT FOUND TOOL DATA Fanuc Alarm Description Fanuc 10/11/12/15/15i The specified tool No. pot No. , for the tool No. , tool length compensation data, and cutter…

Fanuc Alarm PS423 TOOL DATA WRITE ERROR Fanuc Alarm Description Fanuc 15i Writing occurred simultaneously on tool set data by a tool No.