Fanuc Alarms

Fanuc Alarm PS143 BPRNT/DPRNT STATEMENT FORMAT ERROR Fanuc Alarm Description Fanuc 10/11/12/15/15i The format used in the BPRINT statement or DPRINT statement is in error.

Fanuc Alarm PS187 FEED ZERO (COMMAND) Fanuc Alarm Description Fanuc 10/11/12/15/15i The cutting feedrate instructed by an F code has been set to 0. This alarm is also generated if…

Fanuc Alarm PS188 PARAMETER ZERO (DRY RUN) Fanuc Alarm PS188 DRY RUN FEEDRATE IS 0 Fanuc Alarm PS188 FEED ZERO (DRY RUN) Fanuc Alarm Description Fanuc 15i The dry run…

Fanuc Alarm PS190 PARAMETER ZERO (CUT MAX) Fanuc Alarm PS190 CUTTING FEEDRATE IS 0 Fanuc Alarm PS190 FEED ZERO (CUT) Fanuc Alarm Description Fanuc 15i The maximum cutting feedrate parameter…

Fanuc Alarm PS131 MISSING OPEN BRACKET Fanuc Alarm Description Fanuc 10/11/12/15/15i The number of left brackets ([) is less than the number of right brackets (]) in a custom macro…

Fanuc Alarm PS132 MISSING CLOSE BRACKET Fanuc Alarm Description Fanuc 10/11/12/15/15i The number of right brackets (]) is less than the number of left brackets ([) in a custom macro…

Fanuc Alarm PS133 MISSING ‘=’ Fanuc Alarm Description Fanuc 10/11/12/15/15i An equal sign (=) is missing in the arithmetic calculation instruction in a custom macro statement.

Fanuc Alarm PS153 CANNOT USE G31.9 Fanuc Alarm Description Fanuc 15i G31.9 cannot be specified in this modal state. This alarm is also generated when G31.9 is specified when a…

Fanuc Alarm PS134 MISSING ‘,’ Fanuc Alarm PS134 MISSING “/” (Fanuc 10/11/12/15) Fanuc Alarm Description Fanuc 15i A delimiter (,) is missing in a custom macro statement. Fanuc 10/11/12/15 A…

Fanuc Alarm PS135 MACRO STATEMENT FORMAT ERROR Fanuc Alarm Description Fanuc 10/11/12/15/15i The format used in a macro statement in a custom macro is in error.

Fanuc Alarm PS118 TOO MANY BRACKET NESTING Fanuc Alarm Description Fanuc 10/11/12/15/15i Too many brackets “[ ]” were nested in a custom macro. The nesting level including function brackets is…

Fanuc Alarm PS119 ARGUMENT VALUE OUT OF RANGE Fanuc Alarm Description Fanuc 10/11/12/15/15i The value of an argument in a custom macro function is out of range.

Fanuc Alarm PS120 ILLEGAL ARGUMENT FORMAT Fanuc Alarm Description Fanuc 15i The specified argument in the argument function (ATAN, POW) is in error.

Fanuc Alarm PS121 TOO MANY SUB,MACRO NESTING Fanuc Alarm Description Fanuc 15i The total number of subprogram and macro calls exceeds the permissible range. Another subprogram call was executed during…

Fanuc Alarm PS144 G10 FORMAT ERROR Fanuc Alarm Description Fanuc 15i The G10 L No. contains no relevant data input or corresponding option. Data setting address P or R is…

Fanuc Alarm PS145 G10.1 TIME OUT Fanuc Alarm Description Fanuc 10/11/12/15/15i The response to a G10.1 instruction was not received from the PMC within the specified time limit.

Fanuc Alarm PS146 G10.1 FORMAT ERROR Fanuc Alarm Description Fanuc 10/11/12/15/15i The G10.1 instruction format is in error.

Fanuc Alarm PS150 G31 FORMAT ERROR Fanuc Alarm Description Fanuc 15i · No axis is specified or tow or more axes are specified in the torque limit switch instruction (G31P98/P99)….

Fanuc Alarm PS116 WRITE PROTECTED VARIABLE Fanuc Alarm Description Fanuc 10/11/12/15/15i An attempt was made in a custom macro to use on the left side of an expression a variable…

Fanuc Alarm PS142 TOO LONG V–NAME (SETVN) Fanuc Alarm Description Fanuc 10/11/12/15/15i The variable name used in a SETVN statement in a custom macro exceeds 8 characters.

Fanuc Alarm PS128 SEQUENCE NUMBER OUT OF RANGE Fanuc Alarm Description Fanuc 15i The jump destination sequence No. in a custom macro statement GOTO instruction was out of range (valid…

Fanuc Alarm PS115 READ PROTECTED VARIABLE Fanuc Alarm Description Fanuc 10/11/12/15/15i An attempt was made in a custom macro to use on the right side of an expression a variable…

Fanuc Alarm PS138 WHILE STATEMENT FORMAT ERROR Fanuc Alarm Description Fanuc 10/11/12/15/15i The format used in the WHILE statement in a custom macro is in error.

Fanuc Alarm PS139 SETVN STATEMENT FORMAT ERROR Fanuc Alarm Description Fanuc 10/11/12/15/15i The format used in the SETVN statement in a custom macro is in error.

Fanuc Alarm PS141 ILLEGAL CHARACTER IN VAR. NAME Fanuc Alarm Description Fanuc 10/11/12/15/15i The SETVN statement in a custom macro contacts a character that cannot be used in a variable…

Fanuc Alarm PS124 MISSING DO STATEMENT Fanuc Alarm Description Fanuc 10/11/12/15/15i The DO instruction corresponding to the END instruction was missing in a custom macro.

Fanuc Alarm PS125 ILLEGAL EXPRESSION FORMAT Fanuc Alarm Description Fanuc 15i The format used in an expression in a custom macro statement is in error. The parameter tape format is…

Fanuc Alarm PS126 ILLEGAL LOOP NUMBER Fanuc Alarm Description Fanuc 10/11/12/15/15i DO and END Nos. in a custom macro are in error, or exceed the permissible range (valid range: 1…

Fanuc Alarm PS152 G31.9/G31.8 FORMAT ERROR Fanuc Alarm Description Fanuc 15i The format of the G31.9 or G31.8 block is erroneous in the following cases: · The axis was not…

Fanuc Alarm PS137 IF STATEMENT FORMAT ERROR Fanuc Alarm Description Fanuc 10/11/12/15/15i The format used in the IF statement in a custom macro is in error.

Fanuc Alarm PS123 MISSING END STATEMENT Fanuc Alarm Description Fanuc 10/11/12/15/15i The END instruction corresponding to the DO instruction was missing in a custom macro.

Fanuc Alarm PS136 DFA STATEMENT FORMAT ERROR Fanuc Alarm Description Fanuc 10/11/12/15 There is an error in the format used in a DFA statement in a custom macro.

Fanuc Alarm PS122 TOO MANY MACRO NESTING Fanuc Alarm Description Fanuc 15/15i Too many macro calls were nested in a custom macro. The nesting level is 5. Fanuc 10/11/12 Multiplicity…

Fanuc Alarm PS101 ILLEGAL CNC STATEMENT IRT. Fanuc Alarm Description Fanuc 15i An interrupt was made in a state where a custom macro interrupt containing a move instruction could not…

Fanuc Alarm PS110 OVERFLOW: INTEGER Fanuc Alarm Description Fanuc 15i An integer went out of range during arithmetic calculations. Fanuc 10/11/12/15 An integer went out of range during arithmetic calculations…