Fanuc Alarms

Fanuc Alarm 5013 HPCC: CRC OFS REMAIN AT CANCEL (M series) Fanuc Alarm Description G05P0 has been specified in G41/G42 mode or with offset remaining

Fanuc Alarm 5012 G05 P10000 ILLEGAL START UP (HPCC) (M series) Fanuc Alarm Description Function category: High–precision contour control Alarm details: G05 P10000 has been specified in a mode from…

Fanuc Alarm 5009 PARAMETER ZERO (DRY RUN) (M series) Fanuc Alarm Description The maximum feedrate (parameter No. 1422) or the feedrate in dry run (parameter No. 1410) is 0 in…

Fanuc Alarm 5007 TOO LARGE DISTANCE (M series) Fanuc Alarm Description In the HPCC mode, the machine moved beyond the limit. OR Due to compensation, point of intersection calculation, interpolation…

Fanuc Alarm 5006 TOO MANY WORD IN ONE BLOCK (M series) Fanuc Alarm Description The number of words specified in a block exceeded 26 in the HPCC mode. OR The…

Fanuc Alarm 5004 HPCC NOT READY Fanuc Alarm Description (M series) High–precision contour control is not ready.

Fanuc Alarm 5003 ILLEGAL PARAMETER (HPCC) (M series) Fanuc Alarm Description There is an invalid parameter.

Fanuc Alarm 5000 ILLEGAL COMMAND CODE (M series) Fanuc Alarm Description The specified code was incorrect in the high–precision contour control (HPCC) mode.

Fanuc Alarm 4705 PROGRAM ERROR (OT –) Fanuc Alarm Description The value specified in the Z-axis move command exceeded the negative value of stored stroke limit 1. (Advance check)

Fanuc Alarm 4704 PROGRAM ERROR (OT +) Fanuc Alarm Description The value specified in the Z-axis move command exceeded the positive value of stored stroke limit 1. (Advance check)

Fanuc Alarm 4703 PROGRAM ERROR (OT –) Fanuc Alarm Description The value specified in the Y-axis move command exceeded the negative value of stored stroke limit 1. (Advance check)

Fanuc Alarm 4702 PROGRAM ERROR (OT +) Fanuc Alarm Description The value specified in the Y-axis move command exceeded the positive value of stored stroke limit 1. (Advance check)

Fanuc Alarm 4701 PROGRAM ERROR (OT –) Fanuc Alarm Description The value specified in the X-axis move command exceeded the negative value of stored stroke limit 1. (Advance check)

Fanuc Alarm 4700 PROGRAM ERROR (OT +) Fanuc Alarm Description The value specified in the X-axis move command exceeded the positive value of stored stroke limit 1. (Advance check)

Fanuc Alarm 4650 IMPROPER G-CODE IN OFFSET MODE Fanuc Alarm Description In the cutter compensation mode, an inhibited G code (pattern command, G73, G74, G75, etc.) was specified.

Fanuc Alarm 4630 ILLEGAL COMMAND IN LASER MODE Fanuc Alarm Description In the laser mode, a nibbling command or pattern command was specified. In the tracing mode, an attempt was…

Fanuc Alarm 4605 NEED ZRN Fanuc Alarm Description C–axis synchronization failed.

Fanuc Alarm 4604 ILLEGAL AXIS OPERATION Fanuc Alarm Description A C-axis command was specified in the block containing a T command for multiple tools.

Fanuc Alarm 4603 C AXIS SYNCHRONOUS ERROR Fanuc Alarm Description The difference between the position deviation value of C1 axis and C2 axis exceeds the parameter value (No. 16364, 16365)…

Fanuc Alarm 4602 ILLEGAL T-CODE Fanuc Alarm Description The specified T command is not cataloged on the tool register screen.

Fanuc Alarm 4601 INHIBITED T, M COMMAND Fanuc Alarm Description In the block of G52, G72, G73, or G74, a T or M command was specified.

Fanuc Alarm 4600 T, C COMMAND IN INTERPOLATION Fanuc Alarm Description In the linear interpolation (G01) mode or circular interpolation (G02, G03) mode, a T command or C-axis command was…

Fanuc Alarm 4549 ILLEGAL TOOL DATA FORMAT Fanuc Alarm Description The quantity of tool data patterns to be saved is too large to fit the usable area (16 KB).

Fanuc Alarm 4544 MULTI-PIECE RESTART ERROR Fanuc Alarm Description In the command for resuming taking multiple workpieces, the resume position (P) is set to a value beyond the range from…

Fanuc Alarm 4543 MULTI-PIECE Q COMMAND ERROR Fanuc Alarm Description Although G98P0 was specified, the Q value for the G74 command was not 1 or 3. Although G98K0 was specified,…

Fanuc Alarm 4542 MULTI-PIECE COMMAND ERROR Fanuc Alarm Description Although G98P0 was specified, the G73 command was issued. Although G98K0 was specified, the G74 command was issued.

Fanuc Alarm 4540 MULTI-PIECE COMMAND WITHIN MACRO Fanuc Alarm Description The command for taking multiple workpieces (G73, G74) was specified when a U or V macro was being stored.

Fanuc Alarm 4539 MULTI-PIECE SETTING IS ZERO Fanuc Alarm Description The command for taking multiple workpieces (G73, G74) was specified although zero is specified for the function to take multiple…

Fanuc Alarm 4538 W NO. NOT FOUND IN MULTI-PIECE Fanuc Alarm Description Macro number W specified in the command for taking multiple workpieces (G73, G74) is not stored.

Fanuc Alarm 4537 ILLEGAL Q VALUE IN MULTI-PIECE Fanuc Alarm Description In the command for taking multiple workpieces (G73, G74), Q is set to a value beyond the range from…

Fanuc Alarm 4536 NO W, Q COMMAND IN MULTI-PIECE Fanuc Alarm Description W or Q was not specified in the command for taking multiple workpieces (G73, G74).

Fanuc Alarm 4535 U/V MACRO NESTING ERROR Fanuc Alarm Description An attempt was made to call a macro which is defined three times or more using a U or V…

Fanuc Alarm 4534 W MACRO NUMBER NOT FOUND Fanuc Alarm Description Macro number W specified in a U or V macro command is not stored.

Fanuc Alarm 4533 U/V MACRO MEMORY OVERFLOW Fanuc Alarm Description An attempt was made to store too many macros with a U or V macro command.

Fanuc Alarm 4532 IMPROPER U/V MACRO NUMBER Fanuc Alarm Description The number of an inhibited macro (number beyond the range from 01 to 99) was specified in a U or…