Fanuc Alarms

Fanuc Alarm BG1030 NOT READY (DATA SERVER) Fanuc Alarm Description Fanuc 15i With the Ethernet/data server function being used, the board was found to be not ready.

Fanuc Alarm BG1042 Data input error (Remote DGN.) Fanuc Alarm Description Fanuc 15i An error occurred in data input to an I/O device for remote diagnosis.

Fanuc Alarm BG972 BATTERY LOW (MEMORY CARD) Fanuc Alarm Description Fanuc 15i The memory card battery is low.

Fanuc Alarm BG1040 Device open error (Remote DGN.) Fanuc Alarm Description Fanuc 15i An error occurred upon attempting to open an I/O device for remote diagnosis.

Fanuc Alarm BG1041 Illegal command (Remote DGN.) Fanuc Alarm Description Fanuc 15i An invalid command was specified for an I/O device for remote diagnosis.

Fanuc Alarm BG970 ILLEGAL CARD (MEMORY CARD) Fanuc Alarm Description Fanuc 15i This memory card cannot be handled.

Fanuc Alarm BG971 ERASE ERROR (MEMORY CARD) Fanuc Alarm Description Fanuc 15i An error occurred during memory card erase.

Fanuc Alarm BG969 ILLEGAL FORMAT (MEMORY CARD) Fanuc Alarm Description Fanuc 15i Check the file name.

Fanuc Alarm BG1036 MODE ERROR (DATA SERVER) Fanuc Alarm Description Fanuc 15i With the Ethernet/data server function being used, the mode cannot be changed.

Fanuc Alarm BG1037 DOUBLE OPEN (DATA SERVER) Fanuc Alarm Description Fanuc 15i With the Ethernet/data server function being used, an attempt was made to open the same file twice.

Fanuc Alarm BG966 FILE NOT FOUND (MEMORY CARD) Fanuc Alarm Description Fanuc 15i The specified file could not be found on the memory card.

Fanuc Alarm BG967 FILE PROTECTED (MEMORY CARD) Fanuc Alarm Description Fanuc 15i The memory card is write–protected.

Fanuc Alarm BG968 ILLEGAL FILE NAME (MEMORY CARD) Fanuc Alarm Description Fanuc 15i Illegal memory card file name

Fanuc Alarm BG1033 TIME OVER (DATA SERVER) Fanuc Alarm Description Fanuc 15i With the Ethernet/data server function being used, a CNC time–over occurred.

Fanuc Alarm BG1034 CNC ERROR (DATA SERVER) Fanuc Alarm Description Fanuc 15i With the Ethernet/data server function being used, an error occurred in the CNC.

Fanuc Alarm BG1035 SEQUENCE ERROR (DATA SERVER) Fanuc Alarm Description Fanuc 15i With the Ethernet/data server function being used, a conflict occurred in the CNC.

Fanuc Alarm SR591 TV ERROR Fanuc Alarm Description Fanuc 15i An error was detected during the single–block TV error. The TV check can be suppressed by setting TVC parameter No….

Fanuc Alarm BG1032 BOARD ERROR (DATA SERVER) Fanuc Alarm Description Fanuc 15i With the Ethernet/data server function being used, an error was returned from the board.

Fanuc Alarm SR316 H, S, C ERROR Fanuc Alarm Description Fanuc 10/11/12/15 Memory is full.

Fanuc Alarm SR317 H, S, C ERROR Fanuc Alarm Description Fanuc 10/11/12/15 The maximum number of sets of high–speed machining data has been registered (no additional high–speed machining data can…

Fanuc Alarm SR590 TH ERROR Fanuc Alarm Description Fanuc 15i A TH error was detected during reading from an input device. The read code that caused the TH error and…

Fanuc Alarm SR424 OVER MAXIMUM TOOL DATA Fanuc Alarm Description Fanuc 10/11/12/15/15i An attempt was made to set tool data that exceeds the maximum number of tool data sets.

Fanuc Alarm SR425 NOT DELETE TOOL DATA IN OPERATION Fanuc Alarm Description Fanuc 15i An attempt was made to delete currently selected tool data.

Fanuc Alarm SR580 ENCODE ALARM (PSWD&KEY) Fanuc Alarm Description Fanuc 15i When an attempt was made to read a program, the specified password did not match the password on the…

Fanuc Alarm SR581 ENCODE ALARM (PARAMETER) Fanuc Alarm Description Fanuc 15i When an attempt was made to punch an encrypted tape, the punch code parameter was set to EIA. Set…

Fanuc Alarm SR312 H, S, C ERROR Fanuc Alarm Description Fanuc 10/11/12/15 Address P, Q, or L is out of range.

Fanuc Alarm SR313 H, S, C ERROR Fanuc Alarm Description Fanuc 10/11/12/15 High–speed machining data does not exist for the number that was called.

Fanuc Alarm SR314 H, S, C ERROR Fanuc Alarm Description Fanuc 10/11/12/15 No cluster exists for the number that was called.

Fanuc Alarm SR315 H, S, C ERROR Fanuc Alarm Description Fanuc 10/11/12/15 An attempt was made to register a number for which high–speed machining data already exists.

Fanuc Alarm SR421 SETTING COMMAND ERROR Fanuc Alarm Description Fanuc 15i The specified tool data setting (G10 L70 to G11, G10 L71 to G11) is erroneous.

Fanuc Alarm SR422 NOT FOUND TOOL DATA Fanuc Alarm Description Fanuc 15i The tool No. (pot No. ) to which tool data delete was specified cannot be found.

Fanuc Alarm SR423 TOOL DATA WRITE ERROR Fanuc Alarm Description Fanuc 15i A write error occurred simultaneously on tool offset data by a tool No.

Fanuc Alarm SR125 ILLEGAL EXPRESSION FORMAT Fanuc Alarm Description Fanuc 15i The description of the custom macro statement is erroneous. The format of the parameter data is erroneous.

Fanuc Alarm SR310 H, S, C ERROR Fanuc Alarm Description Fanuc 10/11/12/15 G10.3, G11.3, or G65.3 is used incorrectly.

Fanuc Alarm SR311 H, S, C ERROR Fanuc Alarm Description Fanuc 10/11/12/15 A command not permitted during high–speed machining was specified.