Haas Alarms

Alarm: 911 APC-PAL LOAD/UNLOAD AT ZERO – Haas Mill Haas Alarm Description: One or more of the pallets on the APC has a load or unload position set to zero….

Alarm: 910 APC-PROGRAM CONFLICT – Haas Mill Haas Alarm Description: The subprogram you are trying to run is not assigned to the loaded pallet. Another program is assigned to this…

Alarm: 909 APC-PROGRAM NOT LISTED – Haas Mill Haas Alarm Description: No program name in the Pallet Schedule Table for the loaded pallet. To run a program for the loaded…

Alarm: 908 APC UNLOAD-SWITCH MISSED PAL 4 – Haas Mill Haas Alarm Description: Pallet #4 did not return from the receiver to the APC in the allowable amount of time….

Alarm: 907 APC UNLOAD-SWITCH MISSED PAL 3 – Haas Mill Haas Alarm Description: Pallet #3 did not return from the receiver to the APC in the allowable amount of time….

Alarm: 906 INVALID P CODE IN M14, M15, M36 OR M50 – Haas Mill Haas Alarm Description: The P code must be the number of a valid pallet without a…

Alarm: 905 NO P CODE IN M14, M15, M36 – Haas Mill Haas Alarm Description: In M14, M15, M36 must specify pallet number with P code.

Alarm: 904 ATC AXIS VISIBLE – Haas Mill Haas Alarm Description: The tool changer axis must be invisible for tool change operations with the HS tool changers. Set Parameter 462,…

Alarm: 903 CNC MACHINE POWERED UP Haas Alarm Description: When the machine is powered up, Alarm 903 is added to the alarm history along with the date and time. Note…

Alarm: 902 PARAMETERS HAVE BEEN LOADED BY RS232 Haas Alarm Description: When a file has been loaded from RS-232; Alarm 902 is added to the alarm history along with the…

Alarm: 901 PARAMETERS HAVE BEEN LOADED BY DISK Haas Alarm Description: When a file has been loaded from floppy disk, Alarm 901 is added to the alarm history along with…

Alarm: 900 A PARAMETER HAS BEEN CHANGED Haas Alarm Description: When the operator alters the value of a parameter, Alarm 900 is added to the alarm history. When the alarm…

Alarm: 810 PROBE ARM CHUCK CONFLICT Haas Alarm Description: There must be no part in the chuck when the automatic probe arm is lowered (extended). Unclamp the spindle chuck, remove…

Alarm: 809 PROBE ARM SWITCH FAULT Haas Alarm Description: A switch fault was detected in the automatic probe arm system. For example, the switch signals indicated both switches simultaneously, or…

Alarm: 808 AUTOMATIC PROBE ARM FAULT Haas Alarm Description: Automatic probe arm failed to complete command to extend or retract. Check for tools or parts in machining area that block…

Alarm: 802 NEGATIVE R AND C VALUES NOT ALLOWED Haas Alarm Description: Negative values are not allowed when using the ,C ,R corner rounds and chamfering.

Alarm: 801 NO BLOCK DELETES BETWEEN P AND Q – Haas Lathe Haas Alarm Description: Block delete is not allowed between the P and Q blocks of a G71, G72…

Alarm: 800 P AND Q EXCEEDED MEMORY – Haas Lathe Haas Alarm Description: Too many blocks were placed between the P and Q blocks for the G71, G72 or G73….

Alarm: 799 UNKNOWN MOCON2 ERROR – Haas Mill Haas Alarm Description: MOCON2 has reported an alarm to the current software, which was unable to identify the alarm.

Alarm: 797 SUB SPINDLE ORIENTATION FAULT – Haas Lathe Haas Alarm Description: Spindle did not orient correctly. During a spindle orientation function, the spindle rotated but never achieved proper orientation….

Alarm: 796 SUB SPINDLE NOT TURNING – Haas Lathe Haas Alarm Description: Status from subspindle drive indicates it is not at speed when expected. This can also be caused by…

Alarm: 792 MOCON2 WATCHDOG FAULT Haas Alarm Description: The self-test of the MOCON2 has failed. Call your dealer.

Alarm: 791 COMM. FAILURE WITH MOCON2 Haas Alarm Description: During self-test of communications between the MOCON2 and main processor, the main processor does not respond, and one of them is…

Alarm: 788 S TRANSITION FAULT MOCON2 – Haas Lathe Haas Alarm Description: Illegal transition of count pulses in S channel. This alarm usually indicates that the encoder has been damaged…

Alarm: 787 J TRANSITION FAULT MOCON2 – Haas Lathe Haas Alarm Description: Illegal transition of count pulses in J channel. This alarm usually indicates that the encoder has been damaged…

Alarm: 786 Ss TRANSITION FAULT MOCON2 – Haas Lathe Haas Alarm Description: Illegal transition of count pulses in Ss-axis. This alarm usually indicates that the encoder has been damaged and…

Alarm: 785 Tt TRANSITION FAULT MOCON2 – Haas Lathe Haas Alarm Description: Illegal transition of count pulses in Tt-axis. This alarm usually indicates that the encoder has been damaged and…

Alarm: 784 SP MOT ENC TRANSITION FAULT – Haas Lathe Haas Alarm Description: Illegal transition of count pulses in Sp-axis. This alarm usually indicates that the encoder on the spindle…

Alarm: 783 W TRANSITION FAULT MOCON2 – Haas Lathe Haas Alarm Description: Illegal transition of count pulses in W-axis. This alarm usually indicates that the encoder has been damaged and…

Alarm: 782 V TRANSITION FAULT – Haas Lathe Haas Alarm Description: Illegal transition of count pulses in bar feeder. This alarm usually indicates that the encoder has been damaged and…

Alarm: 781 U TRANSITION FAULT MOCON2 – Haas Lathe Haas Alarm Description: Illegal transitions of count pulses in U-axis. This alarm usually indicates that the encoder has been damaged and…

Alarm: 778 S PHASING ERROR MOCON2 – Haas Lathe Haas Alarm Description: Error occurred in phasing initialization of brushless motor. This can be caused by a bad encoder, or a…

Alarm: 777 J PHASING ERROR MOCON2 – Haas Lathe Haas Alarm Description: Error occurred in phasing initialization of brushless motor. This can be caused by a bad encoder, or a…

Alarm: 776 Ss PHASING ERROR MOCON2 – Haas Lathe Haas Alarm Description: Error occurred in phasing initialization of brushless motor. This can be caused by a bad encoder, or a…

Alarm: 775 Tt PHASING ERROR MOCON2 – Haas Lathe Haas Alarm Description: Error occurred in phasing initialization of brushless motor. This can be caused by a bad encoder, or a…