Okuma Alarm-D 4345 Unable to execute feed axis retract function
It isn’t possible to Feed axis retract function execute.
Object
None
Character string
None
Code
XY
X:
bit0->PLC program does not correspond to Feed axis retract function.
bit1->MCS firmware version of NC axis without X axis or Z axis is not since ICBH586.
bit2->MCS firmware version of Main spindle is not since ICBH586.
bit3->MCS firmware version of PLC axis is not since ICBH586.
bit1->MCS firmware version of NC axis without X axis or Z axis is not since ICBH586.
bit2->MCS firmware version of Main spindle is not since ICBH586.
bit3->MCS firmware version of PLC axis is not since ICBH586.
Y:
bit0->MCS firmware version of ZA axis or ZAs axis is not since ICBH586.
bit1->MCS firmware version of XA axis or XAs axis is not since ICBH586.
bit2->MCS firmware version of ZB axis is not since ICBH586.
bit3->MCS firmware version of XB axis is not since ICBH586.
bit1->MCS firmware version of XA axis or XAs axis is not since ICBH586.
bit2->MCS firmware version of ZB axis is not since ICBH586.
bit3->MCS firmware version of XB axis is not since ICBH586.
Probable Faulty Locations
MCS firmware, PLC program
Measures to Take
MCS firmware or PLC program exchange.