Okuma Alarm-D 4738 Magazine OP panel COMM error
A RS232C communication error occurred between the magazine operation panel.
Code
WWXXYYZZ
WW = error information
bit15 hardware error
bit14 sum error
bit13 protocol error
bit12 NAK code error
bit11 software error
bit8 communication stopped error
bit14 sum error
bit13 protocol error
bit12 NAK code error
bit11 software error
bit8 communication stopped error
XX = control sequence no.
XX=0 waiting for parameter window set up.
XX=1 keeping device for magazine panel communication.
XX=2 setting for communication parameter.
XX=3 sending data to POD.
XX=4 waiting for completement of sending data to POD.
XX=5 waiting for ACK code(NAK code) from POD
XX=6 Excuting NAK code.
XX=7 Receiving data from POD.
XX=1 keeping device for magazine panel communication.
XX=2 setting for communication parameter.
XX=3 sending data to POD.
XX=4 waiting for completement of sending data to POD.
XX=5 waiting for ACK code(NAK code) from POD
XX=6 Excuting NAK code.
XX=7 Receiving data from POD.
YY = NAK error no. from POD.
ZZ = hardware error
bit6 time-out error(send)
bit5 ready error(send)
bit4 time-out error(receive)
bit3 ready error(receive)
bit2 framing error(receive)
bit1 over-run error(receive)
bit0 parity error(receive)
Okuma Alarm-D 4738 Magazine OP panel COMM errorbit5 ready error(send)
bit4 time-out error(receive)
bit3 ready error(receive)
bit2 framing error(receive)
bit1 over-run error(receive)
bit0 parity error(receive)