Selca G16 Axis exchange
Contents
G16 Axis1 Axis2 Axis3
| Parameter | Description |
|---|---|
| Axis1 | Axis exchanged with the first machine axis. |
| Axis2 | Axis exchanged with the second machine axis. |
| Axis3 | Axis exchanged with the third machine axis. |
Enabled until G17, G18, or G19 is programmed.
Selca G845 G846 Manual axis control by handwheels during machining ContentsG845 Cancels G846ProgrammingG846 Manual axis control by handwheels during machiningProgrammingParameters G845 Cancels G846 G845 Cancels G846 Programming G845 Enabled: only…
Selca G17 G18 G19 Plane selection ContentsG17 Plane selection XYProgrammingG17 Selection of planes different than XYProgrammingParametersG18 Plane selection ZXProgrammingG19 Plane selection YZProgramming G17 Plane selection XY G17 Plane selection (XY…
Selca G850 G851 Part origin offset by handwheels ContentsG850 Cancels G851ProgrammingG851 Part origin offset by handwheelsProgrammingParameters G850 Cancels G851 G850 Cancels G851 Programming G850 Enabled: only in the block in…
ContentsOsai UGS (UCG) – Use Graphic Scale (Machine plot)ProgrammingParametersExamplesOsai UGS (UCG) – Use 3D Graphic ScaleProgrammingParametersNote Osai UGS (UCG) – Use Graphic Scale (Machine plot) Osai 10 Series UGS command…
Selca G75 G76 Polar coordinate programming ContentsG75 Cancels G76ProgrammingG76 Polar coordinate programmingProgrammingParameters G75 Cancels G76 G75 Cartesian coordinate programming (cancels G76) Programming G75 [X…] [Y…] [Z…] Enabled: (default) until a G76…
Selca G30 G31 Continuous motion mode with automatic feed adjustment ContentsG30 Cancels G31ProgrammingG31 Continuous motion modeProgrammingParameters G30 Cancels G31 G30 Cancels G31 and re-establishes deceleration at block end Programming G30…
Selca G740 G746 G748 G749 4-axis surface machining ContentsG740 Cancels G748 and G749ProgrammingG746 Defers G748 cycleProgrammingG748 4-axis surface machiningProgrammingParametersG749 4-axis surface machiningProgrammingParameters G740 Cancels G748 and G749 G740 Cancels G748…
Selca G817 Tool length offset on an axis non-orthogonal to the machining plane ContentsProgrammingParameters Programming G817 Axis Parameters Parameter Description Axis name of the machine axis to which the compensation…
Selca G00 Axis rapid positioning Programming G00 Axis (or, alternatively, Axis R) Enabled: only in the block in which it is programmed.
Selca G760 G761 Axis travel delimitation ContentsG760 Cancels G761ProgrammingG761 Axis travel delimitationProgrammingParameters G760 Cancels G761 G760 Cancels G761 Programming G760 G761 Axis travel delimitation G761 Axis travel delimitation Programming G761…
Selca G200 G201 G202 Cylindrical programming / Polar programming ContentsG200 Cancels G201 and G202ProgrammingG201 Cylindrical programmingProgrammingParametersG202 Polar programmingProgramming G200 Cancels G201 and G202 G200 Cancels G201 and G202 (cylindrical/polar programming) Programming G200…
ContentsG90 Absolute coordinate programmingProgrammingG91 Incremental coordinate programmingProgramming G90 Absolute coordinate programming Programming G90 Enabled: until a G91 is programmed. G91 Incremental coordinate programming Programming G91 Enabled: until a G90 is…
Selca G60 G61 Scaling factor ContentsG60 Cancels G61ProgrammingG61 Scaling factorProgrammingParametersG61 Programmable zone scalingProgrammingParameters G60 Cancels G61 G60 Cancels G61 (scaling factor) Programming G60 G61 Scaling factor G61 Scaling factor Programming…
Selca G92 F-feed rate override ContentsProgrammingParameters Programming G92 F Parameters Parameter Description F the new feed rate overrides all F functions programmed in the subsequent blocks. Enabled: until a G92 or…
Selca G74 Rounding off in the ±180° range for rotary axes ContentsProgrammingParameters Programming G74 [A] [B] [C] Parameters Parameter Description A, B, C name of the rotary axis where to…
Selca G67 G68 G69 Static TCPM ContentsG67 Cancels G68/G69ProgrammingG68 Static TCPM for rotary tablesProgrammingParametersG69 Static TCPM for rotary headsProgrammingParameters G67 Cancels G68/G69 G67 Cancels G68/G69 static TCPM Programming G67 G68…
Selca G52 Offset of the coordinate system on the plane ContentsProgrammingParameters Programming G52 [X…] [Y…] [Z…] [I] Parameters Parameter Description X, Y, Z coordinates of the new origin with respect…
Selca G27 First point of a SPLINE curve linking a series of at least 5 points ContentsProgrammingParameters Programming G27 X… Y… [I…] [Q…] [D1=1] Parameters Parameter Description X, Y Coordinates…
Selca G94 F-feed rate in mm/min or inches/min ContentsProgrammingParameters Programming G94 F… Parameters Parameter Description F new feed rate. Enabled: until a G92 or a G93 G94 G95 with new…
Selca G95 F-feed rate in mm/rev or inches/rev ContentsProgrammingParameters Programming G95 F… Parameters Parameter Description F new feed rate. Enabled: until a G92 or a G93 G94 G95 with new…
