Selca G728 Ruled surfaces between two profiles: execution
Contents
G728 [TRS [X…] [Y…] [Z…]] [ROTX…] [ROTY…] [ROTZ…]
| Parameter | Description |
|---|---|
| TRS X | X – axis offset by a given value. |
| TRS Y | Y – axis offset by a given value. |
| TRS Z | Z – axis offset by a given value. |
| ROT X | rotation about the X – axis by a given value. |
| ROT Y | rotation about the Y – axis by a given value. |
| ROT Z | rotation about the Z – axis by a given value. |
Selca G727 Ruled surfaces between two profiles: second profile ContentsProgrammingParameters Programming G727 [X… Y…] Z… Parameters Parameter Description X,Y starting point of the second profile. Z Z-coordinate of the second…
Selca G726 Ruled surfaces between two profiles: first profile ContentsProgrammingParameters Programming G726 [X… Y…] Z… I… [J…] [D1=…] [D2=…] Parameters Parameter Description X,Y starting point of the first profile. Z…
Selca G738 Surfaces defined by a plane profile and one or more section profiles: execution ContentsProgrammingParameters Programming G738 [J…] [X… Y…] Parameters Parameter Description J with D0=1 in function G736,…
Selca G737 Surfaces defined by a plane profile and one or more section profiles: section profiles ContentsProgrammingParameters Programming G737 [Q…] [K1] Parameters Parameter Description Q number of the section profile…
Selca G891 Angles of rotation with inclined probes ContentsProgrammingParameters Programming G891 [ROTX…] [ROTY…] [ROTZ…] Parameters Parameter Description ROTX… rotation about X-axis. ROTY… rotation about Y-axis. ROTZ… rotation about Z-axis.
Selca G736 Surfaces defined by a plane profile and one or more section profiles: plane profile and parameters ContentsProgrammingParameters Programming G736 I… [X… Y…] [J…] [K…] [Q…] [D0=…] [D1=…] [D2=…]…
Selca G34 Opens programming of the profile delimiting the zone of ruled surface to be machined ContentsProgrammingParameters Programming G34 [I0] Parameters Parameter Description I0 the delimitation profile is not offset…
Selca G35 Ends programming of the profile delimiting the zone of ruled surface to be machined Programming G35
Selca G50 G51 Offset / rotation of the coordinate system on the plane ContentsG50 Cancels the offset/rotationProgrammingG51 Offset / rotationProgrammingParameters G50 Cancels the offset/rotation G50 Cancels the offset / rotation…
Selca G900 G901 Edit and graphic execution disabling during machining ContentsG900 Cancels G901ProgrammingG901 Edit and graphic execution disabling during machiningProgrammingParameters G900 Cancels G901 G900 Cancels G901 Programming G900 G901 Edit…
Selca G730 G731 High speed milling of profiles defined by points ContentsG730 Cancels G731ProgrammingG731 High speed milling of profiles defined by pointsProgrammingParameters G730 Cancels G731 G730 Cancels G731 (Only for…
Selca CNC 4000/3000 Series control G-Functions/ G-codes for cnc machinists who work on cnc machines with Selca cnc controls. These Selca G Functions work on following Selca cnc controls, Selca…
Selca G93 Feed rate defined as inverse of block execution time ContentsProgrammingParameters Programming G93 F… Parameters Parameter Description F new feed rate. Enabled: until a G92 or a G93 G94…
Selca G732 G733 High speed milling of profiles defined by points with S speed ramp ContentsG732 Cancels G733ProgrammingG733 High speed milling of profilesProgrammingParameters G732 Cancels G733 G732 Cancels G733 Programming…
Selca G734 Spiral milling: execution Programming G734
Selca G780 Grid/circumference pattern machining repeat: execution Programming G780
Selca G1000 G1001 Graphic execution of a program sequence ContentsG1000 Cancels G1001ProgrammingG1001 Graphic execution of a program sequenceProgramming G1000 Cancels G1001 G1000 Cancels G1001 Programming G1000 G1001 Graphic execution of…
Selca G9999 Synchronization of program execution with tool path display Programming G9999 Enabled: only in the block in which it is programmed.
Selca G750 G751 Rotation / offset in space ContentsG750 Cancels G751ProgrammingG751 Rotation/offset in spaceProgrammingParameters G750 Cancels G751 G750 Cancels G751 Programming G750 G751 Rotation/offset in space G751 Rotation/offset in space…
Selca G42 Enables tool radius compensation, tool right of profile ContentsProgrammingParameters Programming G42 [K…] [I1] [Q…] [D0=1] [D1=1] [D2=1] Parameters Parameter Description K selects profile approach mode: K1: automatic approach…
