Sinumerik Alarms

Sinumerik Alarm 104025 No magazine configured Definitions: No magazine was configured. Reactions: – – Remedy: Configure a magazine via the machine data. Program Continuation: Internal

Sinumerik Alarm 104026 Notice: Tool is being loaded! Definitions: Note regarding loading process. Reactions: – – Remedy: Wait until the loading procedure is terminated. Program Continuation: Internal

Sinumerik Alarm 104027 Notice: Tool is being unloaded! Definitions: Note regarding unloading process. Reactions: – – Remedy: Wait until the unloading procedure is terminated. Program Continuation: Internal

Sinumerik Alarm 105014 Error while copying! Definitions: The file could not be copied. Reactions: – – Remedy: – Program Continuation: Internal

Sinumerik Alarm 104029 Loading to this location not possible Definitions: The location may already be occupied. Reactions: – – Remedy: Select another loading location. Program Continuation: Internal

Sinumerik Alarm 105015 Error while renaming! Definitions: The file could not be renamed. Reactions: – – Remedy: – Program Continuation: Internal

Sinumerik Alarm 104030 No more data available Definitions: All existing data was already displayed. Reactions: – – Remedy: – Program Continuation: Internal

Sinumerik Alarm 105000 Error x y Definitions: System-internal error. A memory-access has failed – should not occur in normal operation. Reactions: – – Remedy: – Program Continuation: Internal

Sinumerik Alarm 105004 Clipboard empty! To PASTE, COPY first Definitions: No file could be inserted, as no file was copied to the clipboard. Reactions: – – Remedy: – Program Continuation:…

Sinumerik Alarm 105009 No write-authorization for the data Definitions: The file is write-protected. Reactions: – – Remedy: – Program Continuation: Internal

Sinumerik Alarm 105010 No data selected Definitions: The cursor is not placed on a valid file name. Reactions: – – Remedy: – Program Continuation: Internal

Sinumerik Alarm 105011 Cycle description cov.com not available Definitions: The cycle description sc.com was not found in the NCK file system. Reactions: – – Remedy: – Program Continuation: Internal

Sinumerik Alarm 105012 The program is not or only partially editable (NC reset) Definitions: The selected program is currently being executed. Reactions: – – Remedy: – Program Continuation: Internal

Sinumerik Alarm 105013 The copied data can be inserted with the soft key “Paste” Definitions: The copied data is in the clipboard and can be inserted anywhere via the soft…

Sinumerik Alarm 105006 Only files can be inserted here Definitions: A file of the file type _wpd, i.e. a workpiece, was copied from the workpiece directory and an attempt was…

Sinumerik Alarm 105008 Memory error while writing a cycle call Definitions: The resources of the MMC100 are exhausted. No more dynamic memory available. Reactions: – – Remedy: – Program Continuation:…

Sinumerik Alarm 105001 Cycle description sc.com not available Definitions: The cycle description sc.com was not found in the NCK file system. Reactions: – – Remedy: – – Program Continuation: Internal

Sinumerik Alarm 105002 File xxx already exists Definitions: The file name entered is already in this directory. Reactions: – – Remedy: – Program Continuation: Internal

Sinumerik Alarm 105003 Workpiece xxx already exists Definitions: The workpiece name entered is already in this directory. Reactions: – – Remedy: – Program Continuation: Internal

Sinumerik Alarm 105016 Error while deleting! Definitions: The file could not be deleted. Reactions: – – Remedy: – Program Continuation: Internal

Sinumerik Alarm 105023 File exists already! Definitions: The file cannot be copied to this directory, as a file with the same name is already here. Reactions: – – Remedy: –…

Sinumerik Alarm 105024 Check values! – At least 1 value lies outside the input limits! Definitions: An invalid value was entered in the cycle parameter image. Reactions: – – Remedy:…

Sinumerik Alarm 105025 Please wait, the directory is being prepared! Definitions: The data required for the display of the directory is being determined. Reactions: – – Remedy: – Program Continuation:…

Sinumerik Alarm 105026 Notice! The simulated program and edited program are not the same! Definitions: The program being executed is not identical to the program opened in the editor. Reactions:…

Sinumerik Alarm 105030 Please wait, renumbering is being carried out! Definitions: The part program’s blocks are serially numbered. Reactions: – – Remedy: – Program Continuation: Internal

Sinumerik Alarm 105043 Impermissible increment! Definitions: The increment was entered as a negative. Reactions: – – Remedy: – Program Continuation: Internal

Sinumerik Alarm 105017 Selection is only possible after being enabled or in the RESET state. Definitions: The selected program is either being currently executed or was not yet enabled. Reactions:…

Sinumerik Alarm 105050 Please wait: Graphic is being output! Definitions: The help displays are being prepared for display. Reactions: – – Remedy: – Program Continuation: Internal

Sinumerik Alarm 105018 Error during program generation! Definitions: The program could not be created; there may no longer be sufficient memory. Reactions: – – Remedy: – Program Continuation: Internal

Sinumerik Alarm 105019 Error while opening a window! Definitions: The window could not be opened. System error that should not occur in normal operation. Reactions: – – Remedy: – Program…

Sinumerik Alarm 105020 Error while closing a window! Definitions: The window could not be closed. System error that should not occur in normal operation. Reactions: – – Remedy: – Program…

Sinumerik Alarm 105021 Error during workpiece generation! Definitions: The workpiece could not be created. Reactions: – – Remedy: – Program Continuation: Internal

Sinumerik Alarm 105022 Error during enabling! Definitions: The program could not be enabled. Reactions: – – Remedy: – Program Continuation: Internal

Sinumerik Alarm 105031 Renumbering was aborted! Definitions: Renumbering of the part program was aborted. Insufficient part program memory may be the cause of the error. Reactions: – – Remedy: –…

Sinumerik Alarm 105032 Renumbering finished! Definitions: Renumbering of the part program was completed without errors. Reactions: – – Remedy: – Program Continuation: Internal