Sinumerik Alarms

Sinumerik Alarm 20210 Channel %1 block %3 spindle %2 wrong values for centerless grinding Parameters: %1 = Channel number %2 = Spindle number %3 = Block number, label Definitions: It…

Sinumerik Alarm 20204 Channel %1 PUTFTOC command not allowed with FTOCOF Parameters: %1 = Channel number Definitions: A tool fine compensation has been written for channel %1 with PUTFTOC. The…

Sinumerik Alarm 20203 Channel %1 no active tool Parameters: %1 = Channel number Definitions: A tool fine compensation has been written for the active tool of channel %1 with PUTF-…

Sinumerik Alarm 20201 Channel %1 spindle %2 no tool assigned Parameters: %1 = Channel number %2 = Spindle number Definitions: In order to make allowance for the fine tool compensation…

Sinumerik Alarm 20200 Channel %1 invalid spindle number %2 with tool fine compensation Parameters: %1 = Channel number target channel %2 = Spindle number Definitions: There is no spindle/axis assignment…

Sinumerik Alarm 20170 Channel %1 machine data $AC_FIFO invalid Parameters: %1 = Channel number Definitions: The structure of the FIFO variable $AC_FIFO – $AC_FIFO10 determined by the machine data $MC_NUM_AC_FIFO,…

Sinumerik Alarm 20160 Channel %1 tool management: PLC can terminate only incorrectly aborted commands Parameters: %1 = Channel number Definitions: Indication that the PLC wanted to interrupt an active command…

Sinumerik Alarm 20150 Channel %1 tool management: PLC terminates interrupted command Parameters: %1 = Channel number Definitions: Indication that the PLC has terminated an interrupted command (with alarm output) from…

Sinumerik Alarm 20149 Channel %1 block %2 motion synchronous action: illegal index Parameters: %1 = Channel number %2 = Block number Definitions: An invalid index was used for access to…

Sinumerik Alarm 20148 Channel %1 block %2 motion synchronous action: internal error %3 Parameters: %1 = Channel number %2 = Block number %3 = Error code Definitions: An internal error…

Sinumerik Alarm 20147 Channel %1 block %2 motion synchronous action: command not executable Parameters: %1 = Channel number %2 = Block number Definitions: One of the commands for the synchronous…

Sinumerik Alarm 20146 Channel %1 block %2 motion synchronous action: nesting depth exceeded Parameters: %1 = Channel number %2 = Block number Definitions: For calculating arithmetic expressions in motion synchronous…

Sinumerik Alarm 20145 Channel %1 block %2 motion synchronous action: arithmetic error Parameters: %1 = Channel number %2 = Block number Definitions: In calculating an arithmetic expression for a motion…

Sinumerik Alarm 20144 Channel %1 block %2 motion synchronous action: system variable access not possible Parameters: %1 = Channel number %2 = Block number Definitions: When using system variables, it…

Sinumerik Alarm 20143 Channel %1 axis %2 command axis cannot be started as it is controlled by the PLC Parameters: %1 = Channel number %2 = Axis name, spindle number…

Sinumerik Alarm 20142 Channel %1 command axis %2: rotation of axis container already enabled Parameters: %1 = Channel number %2 = Axis Definitions: The synchronized action instruction is not allowed…

Sinumerik Alarm 20141 Channel %1 motion synchronous action: illegal axis type Parameters: %1 = Channel number Definitions: The requested command is not permissible in the current axis status for the…

Sinumerik Alarm 20140 Channel %1 motion synchronous action: traversing of command axis %2 see NC alarm %3 Parameters: %1 = Channel number %2 = Axis %3 = NC alarm Definitions:…

Sinumerik Alarm 20130 Channel %1 contour tunnel monitoring Parameters: %1 = Channel number Definitions: The tool tip has exited the tunnel placed around the desired contour, i.e. the distance between…

Sinumerik Alarm 20125 Axis %1: change of compensation value is too rapid Parameters: %1 = Axis name, spindle number Definitions: The compensation value has changed more rapidly than has been…

Sinumerik Alarm 20124 Axis %1: sum of compensation values too large Parameters: %1 = Axis name, spindle number Definitions: The sum of the compensation values from all tables assigned to…

Sinumerik Alarm 20123 Axis %1: different output assignment of multiplied tables Parameters: %1 = Axis name, spindle number Definitions: IInterpolatory compensation with tables. The two tables whose outputs are to…

Sinumerik Alarm 20122 Compensation table %1: invalid axis assignment Parameters: %1 = Compensation table Definitions: IInterpolatory compensation with tables. The input or output axes assignment in the given table is…

Sinumerik Alarm 20121 Axis %1: Configuration error in compensation table %2 Parameters: %1 = Axis name, spindle number %2 = Compensation table Definitions: IInterpolatory compensation with tables. The settings for…

Sinumerik Alarm 20120 Axis %1: too many compensation relations Parameters: %1 = Axis name, spindle number Definitions: IInterpolatory compensation with tables. For each axis, the maximum number of compensation relationships…

Sinumerik Alarm 20109 Error in communication with the digitizer: status code of com-circuit: %1 Parameters: %1 = Status byte Definitions: The circuit for serial communication with the digitizing unit signals…

Sinumerik Alarm 20109 Error in communication with the digitizer: status code of com-circuit: %1 Parameters: %1 = Status byte Definitions: The circuit for serial communication with the digitizing unit signals…

Sinumerik Alarm 20108 Invalid data package received from the digitizer. Error codes: %1, %2 Parameters: %1 = Error code of cyclic packet %2 = Error code of out-of-band packet Definitions:…

Sinumerik Alarm 20106 Emergency stop set by the digitizer Definitions: The digitizing unit has recognized a serious error and triggered an emergency stop. Cause: See display on the digitizing unit….

Sinumerik Alarm 20103 Channel %1: digitizing module does not support 3+2 axis digitizing Parameters: %1 = Channel number Definitions: Prerequisite for 3+2 axis digitizing is that the NCU and the…

Sinumerik Alarm 20102 Channel %1: No or invalid trafo at digitizing active Parameters: %1 = Channel number Definitions: Prerequisite for the 3+2 axis digitizing is an active kinematic transformation. Permitted…

Sinumerik Alarm 20101 Communication with the digitizer not possible Definitions: The attempt to synchronize the communications link to the digitizing unit and to transfer the machine parameters was aborted after…

Sinumerik Alarm 20100 Channel %1: invalid configuration for digitizing function Parameters: %1 = Channel number Definitions: • The digitizing function requires 3 geometry axes to be defined in the channel….

Sinumerik Alarm 20096 Axis %1 brake test aborted, additional information %2 Parameters: %1 = Axis name, spindle number %2 = Error information based on $VA_FXS_INFO Definitions: The brake test has…

Sinumerik Alarm 20095 Axis %1 illegal torque, current torque %2 Parameters: %1 = Axis name, spindle number %2 = Current holding torque when brake test selected Definitions: The current holding…