Sinumerik Alarms

Sinumerik Alarm 20094 Axis %1 function has been aborted Parameters: %1 = Axis name, spindle number Definitions: The function has been aborted. The possible reasons for this are: • Because…

Sinumerik Alarm 20093 Axis %1 standstill monitoring at fixed-stop end point has been triggered Parameters: %1 = Axis name, spindle number Definitions: The position of the axis has been beyond…

Sinumerik Alarm 20092 Axis %1 travel to fixed stop still active Parameters: %1 = Axis name, spindle number Definitions: An attempt has been made to move an axis while it…

Sinumerik Alarm 20091 Axis %1 has not reached fixed stop Parameters: %1 = Axis name, spindle number Definitions: On attempting to traverse against a fixed stop, the programmed end position…

Sinumerik Alarm 20090 Axis %1 travel to fixed stop not possible. Check programming and axis data. Parameters: %1 = Axis name, spindle number Definitions: 1. The “Traverse against fixed stop”…

Sinumerik Alarm 20085 Channel %1 contour handwheel: traverse direction or overtravel of beginning of block not allowed Parameters: %1 = Channel number Definitions: Travel takes place on the path with…

Sinumerik Alarm 20080 Channel %1 axis %2 no handwheel assigned for overlaid motion Parameters: %1 = Channel number %2 = Axis number Definitions: No handwheel has been assigned for this…

Sinumerik Alarm 20079 Channel %1 axis %2 oscillation path length %3

Sinumerik Alarm 20078 Channel %1 axis %2 programmed position is behind working area limit %3 Parameters: %1 = Channel number %2 = Axis number %3 = “+” or “-” Definitions:…

Sinumerik Alarm 20077 Channel %1 axis %2 programmed position is behind software limit switch %3 Parameters: %1 = Channel number %2 = Axis number %3 = “+” or “-” Definitions:…

Sinumerik Alarm 20076 Channel %1 axis %2 oscillating – mode change not possible Parameters: %1 = Channel number %2 = Axis number Definitions: The axis is performing an oscillating movement….

Sinumerik Alarm 20075 Channel %1 axis %2 can currently not oscillate Parameters: %1 = Channel number %2 = Axis number Definitions: The axis cannot perform an oscillating movement now because…

Sinumerik Alarm 20074 Channel %1 axis %2 wrong index position Parameters: %1 = Channel number %2 = Axis name, spindle number Definitions: For a concurrent positioning axis declared as indexing…

Sinumerik Alarm 20073 Channel %1 axis %2 cannot be repositioned Parameters: %1 = Channel number %2 = Axis number Definitions: The concurrent positioning axis cannot be positioned because it has…

Sinumerik Alarm 20072 Channel %1 axis %2 is not an indexing axis Parameters: %1 = Channel number %2 = Axis number Definitions: The displayed axis is operated as a concurrent…

Sinumerik Alarm 20071 Channel %1 axis %2 programmed end position is behind working area limit %3 Parameters: %1 = Channel number %2 = Axis number %3 = “+” or “-”…

Sinumerik Alarm 20070 Channel %1 axis %2 programmed end position is behind software limit switch %3 Parameters: %1 = Channel number %2 = Axis number %3 = “+” or “-”…

Sinumerik Alarm 20065 Channel %1 master spindle not defined for geometry axes in JOG mode Parameters: %1 = Channel number Definitions: The displayed axis is to be traversed as geometry…

Sinumerik Alarm 20063 Channel %1 axis %2 orientation axes cannot be traversed without transformation Parameters: %1 = Channel number %2 = Axis name Definitions: An attempt was made to move…

Sinumerik Alarm 20062 Channel %1 axis %2 already active Parameters: %1 = Channel number %2 = Axis name, spindle number Definitions: The displayed axis is already traversing as a machine…

Sinumerik Alarm 20061 Channel %1 axis %2 cannot be traversed as orientation axis Parameters: %1 = Channel number %2 = Axis name Definitions: The axis is not an orientation axis…

Sinumerik Alarm 20060 Channel %1 axis %2 cannot be traversed as geometry axis Parameters: %1 = Channel number %2 = Axis name Definitions: The axis is currently not in “Geometry…

Sinumerik Alarm 20058 Channel %1 axis %2 revolutional feedrate: illegal feed source Parameters: %1 = Channel number %2 = Axis name, spindle number Definitions: An axis/spindle is to be traversed…

Sinumerik Alarm 20057 Channel %1 block %2 revolutional feedrate for axis/spindle %3 is

Sinumerik Alarm 20056 Channel %1 axis %2 no revolutional feedrate possible. Axis/spindle %3 stationary Parameters: %1 = Channel number %2 = Axis name, spindle number % 3 = Axis name,…

Sinumerik Alarm 20055 Channel %1 master spindle not present in JOG mode Parameters: %1 = Channel number Definitions: The displayed axis is to be traversed as machine axis in JOG…

Sinumerik Alarm 20054 Channel %1 axis %2 wrong index for indexing axis in JOG mode Parameters: %1 = Channel number %2 = Axis name, spindle number Definitions: 1. The displayed…

Sinumerik Alarm 20053 Channel %1 axis %2 DRF, FTOCON, external zero point offset not possible Parameters: %1 = Channel number %2 = Axis name, spindle number Definitions: The axis is…

Sinumerik Alarm 20052 Channel %1 axis %2 already active Parameters: %1 = Channel number %2 = Axis name, spindle number Definitions: The axis is to traverse as machine axis in…

Sinumerik Alarm 20051 Channel %1 axis %2 handwheel mode not possible Parameters: %1 = Channel number %2 = Axis name, spindle number Definitions: The axis is already traveling via the…

Sinumerik Alarm 20050 Channel %1 axis %2 handwheel mode active Parameters: %1 = Channel number %2 = Axis name, spindle number Definitions: The axes cannot be traversed in JOG mode…

Sinumerik Alarm 20008 Channel %1 axis %2 reference point approach requires second referenced measuring system Parameters: %1 = Channel number %2 = Axis name, spindle number Definitions: When setting 34200…

Sinumerik Alarm 20007 Channel %1 axis %2 reference point approach requires 2 measuring systems Parameters: %1 = Channel number %2 = Axis name, spindle number Definitions: 2 encoders are needed…

Sinumerik Alarm 20006 Channel %1 axis %2 reference point creep velocity not reached Parameters: %1 = Channel number %2 = Axis name, spindle number Definitions: In phase 2 of reference…

Sinumerik Alarm 20005 Channel %1 axis %2 reference point approach aborted Parameters: %1 = Channel number %2 = Axis name, spindle number Definitions: Channel-specific referencing could not be completed for…