Sinumerik Alarms

Sinumerik Alarm 16421 Channel %1 block %2 angle %3 programmed repeatedly in the block Parameters: %1 = Channel number %2 = Block number, label %3 = Angle Definitions: It is…

Sinumerik Alarm 16420 Channel %1 block %2 axis %3 programmed repeatedly Parameters: %1 = Channel number %2 = Block number, label %3 = Axis name, spindle number Definitions: It is…

Sinumerik Alarm 16410 Channel %1 block %2 axis %3 is not a geometry axis Parameters: %1 = Channel number %2 = Block number, label %3 = Axis name, spindle number…

Sinumerik Alarm 16400 Channel %1 block %2 positioning axis %3 cannot participate in spline Parameters: %1 = Channel number %2 = Block number, label %3 = Axis name, spindle number…

Sinumerik Alarm 16300 Channel %1 block %2 denominator polynominal with zero places within parameter range not allowed Parameters: %1 = Channel number %2 = Block number, label Definitions: The programmed…

Sinumerik Alarm 16200 Channel %1 block %2 spline and polynominal interpolation not available Parameters: %1 = Channel number %2 = Block number, label Definitions: The spline and polynomial interpolation are…

Sinumerik Alarm 16150 Channel %1 block %2 invalid spindle number with PUTFTOCF Parameters: %1 = Channel number %2 = Block number, label Definitions: The spindle number programmed for PUTFTOC or…

Sinumerik Alarm 16140 Channel %1 block %2 FTOCON not allowed Parameters: %1 = Channel number %2 = Block number, label Definitions: The tool fine compensation (FTOC) is not compatible with…

Sinumerik Alarm 16130 Channel %1 block %2 instruction not allowed with FTOCON Parameters: %1 = Channel number %2 = Block number, label Definitions: • Case 1: A plane change is…

Sinumerik Alarm 16120 Channel %1 block %2 invalid index for tool fine compensation Parameters: %1 = Channel number %2 = Block number, label Definitions: Mistake in programming: The 2nd parameter…

Sinumerik Alarm 16110 Channel %1 block %2 spindle %3 for dwell time not in control mode Parameters: %1 = Channel number %2 = Block number, label %3 = Axis, spindle…

Sinumerik Alarm 16105 Channel %1 block %2 spindle %3 cannot be assigned Parameters: %1 = Channel number %2 = Block number, label %3 = String Definitions: Mistake in programming: The…

Sinumerik Alarm 16100 Channel %1 block %2 spindle %3 not available in the channel Parameters: %1 = Channel number %2 = Block number, label %3 = String Definitions: Mistake in…

Sinumerik Alarm 16020 Channel %1 repositioning in block %2 is not possible Parameters: %1 = Channel number %2 = Block number, label Definitions: Programming or operator action incorrect: Repositioning via…

Sinumerik Alarm 16016 Channel %1 block %2 no retraction position programmed for axis %3 Parameters: %1 = Channel number %2 = Block number, label %3 = Axis name Definitions: The…

Sinumerik Alarm 16015 Channel %1 block %2 wrong axis identifier %3 Parameters: %1 = Channel number %2 = Block number, label %3 = Axis name Definitions: Axis names from different…

Sinumerik Alarm 16010 Channel %1 block %2 machining stop after lift fast Parameters: %1 = Channel number %2 = Block number, label Definitions: LIFTFAST without interrupt routine (Asup) has been…

Sinumerik Alarm 16005 Channel %1 block %2 invalid value for lifting distance Parameters: %1 = Channel number %2 = Block number, label Definitions: Mistake in programming: the value for the…

Sinumerik Alarm 15960 Channel %1 block %2 no traverse motion programmed Parameters: %1 = Channel number %2 = Block number, label Definitions: Measure without deletion of distance-to-go In the part…

Sinumerik Alarm 15950 Channel %1 block %2 no traverse motion programmed Parameters: %1 = Channel number %2 = Block number, label Definitions: Measure with deletion of distance-to-go In the part…

Sinumerik Alarm 15910 Channel %1 block %2 touch probe not allowed Parameters: %1 = Channel number %2 = Block number, label Definitions: Measure without deletion of distance-to-go In the part…

Sinumerik Alarm 15900 Channel %1 block %2 touch probe not allowed Parameters: %1 = Channel number %2 = Block number, label Definitions: Measure with deletion of distance-to-go In the part…

Sinumerik Alarm 15810 Channel %1 block %2 wrong array dimension for CONTPRON/CONTDCON Parameters: %1 = Channel number %2 = Block number, label Definitions: The number of columns for the array…

Sinumerik Alarm 15800 Channel %1 block %2 wrong starting conditions for CONTPRON/CONTDCON Parameters: %1 = Channel number %2 = Block number, label Definitions: There is an error in the start…

Sinumerik Alarm 15700 Channel %1 block %2 illegal cycle alarm number %3 Parameters: %1 = Channel number %2 = Block number, label %3 = Cycle alarm number Definitions: A SETAL…

Sinumerik Alarm 15500 Channel %1 block %2 illegal angle of shear Parameters: %1 = Channel number %2 = Block number, label Definitions: The function CSHEAR has been called with an…

Sinumerik Alarm 15460 Channel %1 block %2 syntax error with modal function Parameters: %1 = Channel number %2 = Block number, label Definitions: The addresses programmed in the block are…

Sinumerik Alarm 15450 Channel %1 block %2 compiled program cannot be stored Parameters: %1 = Channel number %2 = Block number, label Definitions: In the compile mode, a compiled program…

Sinumerik Alarm 15420 Channel %1 block %2 instruction in current mode not allowed Parameters: %1 = Channel number %2 = Block number, label Definitions: The alarm is output in the…

Sinumerik Alarm 15410 Channel %1 block %2 initialization file contains invalid M function Parameters: %1 = Channel number %2 = Block number, label Definitions: The only M function allowed in…

Sinumerik Alarm 15400 Channel %1 block %2 selected initial init file does not exist Parameters: %1 = Channel number %2 = Block number, label Definitions: The operator has selected an…

Sinumerik Alarm 15395 Channel %1 master-slave not executable during block search Parameters: %1 = Channel number Definitions: A master-slave coupling is to be closed in the part program via the…

Sinumerik Alarm 15390 Channel %1 block %2 %3 not executed during block search Parameters: %1 = Channel number %2 = Block number, label %3 = Source symbol Definitions: During block…

Sinumerik Alarm 15380 Channel %1 block %2 illegal incremental programming in axis %3 Parameters: %1 = Channel number %2 = Block number, label %3 = Axis Definitions: The first axis…

Sinumerik Alarm 15370 Channel %1 target of block search not found Parameters: %1 = Channel number Definitions: In a block search, an impermissible search target has been specified (e.g. negative…