Sinumerik Alarms

Sinumerik Alarm 14812 Channel %1 block %2 SOFTA not available for axis %3 Parameters: %1 = Channel number %2 = Block number, label %3 = Axis Definitions: SOFT is to…

Sinumerik Alarm 14811 Channel %1 block %2 incorrect value range for acceleration of axis/spindle %3 Parameters: %1 = Channel number %2 = Block number, label %3 = Axis, spindle Definitions:…

Sinumerik Alarm 14810 Channel %1 block %2 negative axis speed programmed for positioning axis %3 Parameters: %1 = Channel number %2 = Block number, label %3 = Axis Definitions: A…

Sinumerik Alarm 14800 Channel %1 block %2 programmed path speed less or equal to zero Parameters: %1 = Channel number %2 = Block number, label Definitions: A negative F value…

Sinumerik Alarm 14790 Channel %1 block %2 axis %3 programmed by PLC Parameters: %1 = Channel number %2 = Block number, label %3 = Axis Definitions: In the NC block,…

Sinumerik Alarm 14780 Channel %1 block %2 unreleased option used Parameters: %1 = Channel number %2 = Block number, label Definitions: A non-released option has been used in the block….

Sinumerik Alarm 14770 Channel %1 block %2 auxiliary function programmed incorrectly Parameters: %1 = Channel number %2 = Block number, label Definitions: The permissible number of programmed auxiliary functions per…

Sinumerik Alarm 14767 Machine data matching via NCU link not complete Definitions: A non-released option has been used in the block. Reactions: – Alarm display. – Interface signals are set….

Sinumerik Alarm 14766 NCU link is heavily loaded, impending memory shortage Definitions: Informational alarm for NC program developer. The capacity of the NCU link is not large enough to transfer…

Sinumerik Alarm 14765 NCU link cannot transfer all link variables Definitions: A value assignment to a link variable (e.g. $a_dld[16]=19) is performed in the main run and transferred via NCU…

Sinumerik Alarm 14764 NCU link cannot transfer all link variables immediately Definitions: Informational alarm for NC program developer. A value assignment to a link variable (e.g. $a_dld[16]=19) is performed in…

Sinumerik Alarm 14763 Channel %1 block %2 too many link variables programmed Parameters: %1 = Channel number %2 = Block number, label Definitions: The number of NCU link variables programmed…

Sinumerik Alarm 14762 Channel %1 block %2 too many PLC variables programmed Parameters: %1 = Channel number %2 = Block number, label Definitions: The number of programmed PLC variables auxiliary…

Sinumerik Alarm 14761 Channel %1 block %2 motion synchronous action: DELDTG function not allowed with active tool radius compensation Parameters: %1 = Channel number %2 = Block number, label Definitions:…

Sinumerik Alarm 14760 Channel %1 block %2 auxiliary function of a group programmed repeatedly Parameters: %1 = Channel number %2 = Block number, label Definitions: The M and H functions…

Sinumerik Alarm 14759 Channel %1 block %2 motion synchronous action and wrong axis type Parameters: %1 = Channel number %2 = Block number, label Definitions: When there are several feeds,…

Sinumerik Alarm 14758 Channel %1 block %2 programmed value not available Parameters: %1 = Channel number %2 = Block number, label Definitions: The synchronous variables $AA_LOAD, $AA_TORQUE, $AA_POWER and $AA_CURR…

Sinumerik Alarm 14757 Channel %1 block %2 motion synchronous action and wrong type Parameters: %1 = Channel number %2 = Block number, label Definitions: Programmed combination between action and type…

Sinumerik Alarm 14756 Channel %1 block %2 motion synchronous action and wrong value Parameters: %1 = Channel number %2 = Block number, label Definitions: Value of the synchronous action or…

Sinumerik Alarm 14755 Channel %1 block %2 motion synchronous actions without traverse motion Parameters: %1 = Channel number %2 = Block number, label Definitions: The programmed motion synchronous action and…

Sinumerik Alarm 14754 Channel %1 block %2 motion synchronous actions and wrong feed type Parameters: %1 = Channel number %2 = Block number, label Definitions: The active feed type is…

Sinumerik Alarm 14753 Channel %1 block %2 motion synchronous actions with illegal interpolation type Parameters: %1 = Channel number %2 = Block number, label Definitions: The active interpolation type (e.g….

Sinumerik Alarm 14752 Channel %1 block %2 DELDTG | STOPREOF conflict Parameters: %1 = Channel number %2 = Block number, label Definitions: In a block of motion synchronous actions referring…

Sinumerik Alarm 14751 Channel %1 block %2 resources for motion synchronous actions not sufficient (code: %3) Parameters: %1 = Channel number %2 = Block number, label %3 = Identifier Definitions:…

Sinumerik Alarm 14750 Channel %1 block %2 too many auxiliary functions programmed Parameters: %1 = Channel number %2 = Block number, label Definitions: More than 10 auxiliary functions have been…

Sinumerik Alarm 14745 Channel %1 block %2 centerless grinding not active Parameters: %1 = Channel number %2 = Block number, label Definitions: An attempt has been made to switch off…

Sinumerik Alarm 14740 Channel %1 block %2 no tool data available for centerless grinding Parameters: %1 = Channel number %2 = Block number, label Definitions: For centerless grinding, the tool…

Sinumerik Alarm 14730 Channel %1 block %2 conflict at activation of centerless transformation Parameters: %1 = Channel number %2 = Block number, label Definitions: • Centerless transformation may not be…

Sinumerik Alarm 14720 Channel %1 block %2 axes for centerless transformation not available Parameters: %1 = Channel number %2 = Block number, label Definitions: In the channel not all of…

Sinumerik Alarm 14710 Channel %1 block %2 error in initialization sequence in function %3 Parameters: %1 = Channel number %2 = Block number, label %3 = Identifier of the function…

Sinumerik Alarm 14701 Channel %1 block %2 number of available NC blocks reduced by %3 Parameters: %1 = Channel number %2 = Block number, label %3 = Number of non-available…

Sinumerik Alarm 14700 Channel %1 block %2 timeout during command to interpreter Parameters: %1 = Channel number %2 = Block number, label Definitions: A timeout has occurred in control-internal commands…

Sinumerik Alarm 14660 Channel %1 block %2 SETINT instruction with invalid priority Parameters: %1 = Channel number %2 = Block number, label Definitions: The NCK input number must lie between…

Sinumerik Alarm 14650 Channel %1 block %2 SETINT instruction with invalid ASUP input Parameters: %1 = Channel number %2 = Block number, label Definitions: Asynchronous subroutines are subroutines that are…

Sinumerik Alarm 14610 Channel %1 block %2 compensation block not possible Parameters: %1 = Channel number %2 = Block number, label Definitions: An alarm was output which could be eliminated…